VADEN Spare Parts for the Volvo FL10
VADEN Spare Parts for the Volvo FL10
The VOLVO FL10 is the 10-litre model in Volvo's FL mid-range cab-over truck family, built from 1985 to 1998 for regional distribution and interregional haulage. VADEN offers 29 compatible references for the FL10 across air brake compressors, clutch and brake system part groups — find the right part for your truck by OEM number.
Products compatible with the Volvo FL10
This catalogue is a live, filtered stock list of VADEN parts compatible with the VOLVO FL10. VADEN is an independent aftermarket manufacturer; VOLVO and FL10 are trademarks used here only to indicate compatibility, so we recommend confirming fitment against your chassis or OEM number before ordering.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Volvo FL10 generations
The table below summarizes the VOLVO FL10's two main production generations, but generation alone does not guarantee fitment — always check your chassis or OEM number to confirm the correct VADEN part.
| Generation | Years | Engines |
|---|---|---|
| FL10 (First series) | 1985–1994 | 9.6-litre turbo diesel inline-6 from the Volvo TD100/D10 family (TD101F, TD102F, TD103ES variants), roughly 290–320 hp |
| FL10 (D10A / D10B — Euro-1 to Euro-2) | ~1994/95–1998 | D10A / D10B electronically controlled (EDC) 9.6-litre inline-6; FL10-320 at roughly 320 PS (~315 hp) and FL10-360 at roughly 360 PS (~355 hp) |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Are VADEN's VOLVO FL10 parts genuine Volvo parts?
No. VADEN is an aftermarket manufacturer independent of Volvo; VOLVO and FL10 are trademarks of their respective owner, used here only to indicate compatibility, and VADEN has no official affiliation with them. The products in this catalogue are VADEN-made spare parts engineered to fit the VOLVO FL10.
Which VADEN products are compatible with the VOLVO FL10?
VADEN's VOLVO FL10 catalogue currently lists 29 compatible references across three part groups: air brake compressors, clutch, and brake system. The catalogue reflects live stock data, so we recommend always confirming a part's fitment against your OEM or chassis number.
How do I use the OEM number to pick the right part?
Model and year range alone don't guarantee an exact fit — even within the same FL10 generation, different configurations can use different part numbers. In the VADEN catalogue, match the OEM or cross-reference number shown on each product page against the number on your chassis plate or original part before ordering.
Which FL10 engines and generations does VADEN cover?
VADEN covers both main FL10 generations: the first series (1985–1994) with TD101/TD102/TD103 engines from the TD100/D10 family, and the 1994/95–1998 series with D10A (Euro-1) and D10B (Euro-2) engines used in the FL10-320 and FL10-360. Each product page notes which engine or generation a part is intended for, alongside its OEM number.
Can a part for one FL10 generation fit the other generation?
Some VADEN parts are common to both the first-series and D10A/D10B FL10 generations, but this isn't true for every product — it depends on engine type, chassis configuration and build year. Rather than assuming cross-generation fitment, confirm it by matching the OEM number of the part you're considering against your vehicle's original part number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, FL10 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
