VADEN Spare Parts for the Volvo FH II
VADEN Spare Parts for the Volvo FH II
The VOLVO FH II is Volvo's flagship heavy-duty long-haul truck, built on the new-generation cab unveiled in 2012 and offered as a tractor unit and rigid. Browse 105+ VADEN references compatible with this model and find the exact part by its OEM number.
Products compatible with the Volvo FH II
The catalogue below is a live, filtered stock list of VADEN products compatible with the VOLVO FH II, so its contents change with current stock. Confirm the fitment of every listed part against your vehicle's OEM number. VADEN is an independent aftermarket spare-parts manufacturer; VOLVO and FH are trademarks used here solely to indicate compatibility.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Volvo FH II generations
The table below summarises the VOLVO FH II generations and their engine options; generation alone is not enough — exact fitment is determined by the OEM or chassis number.
| Generation | Years | Engines |
|---|---|---|
| FH II — Euro 5 launch phase (new-generation cab) | 2012–2014 | D13A / D13C (12.8 L, Euro 5); D16G (16.1 L, Euro 5) |
| FH II — Euro 6 | 2013/2014–present | D13K (12.8 L, ~420–540 hp); D16K (16.1 L, 550/650/750 hp, from 2014); D17A (17.3 L, up to 780 PS, FH16 / FH Aero, from 2024) |
| Earlier FH platform (context — not the "FH II" catalogue entry) | 1993–2013 | FH12 D12A/C/D/F (12.1 L); FH13 D13A/B/C (12.8 L, from 2005); FH16 D16A/B/C/E/G (16.1 L) |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Are VADEN parts compatible with the VOLVO FH II?
Yes. The VADEN products listed on this page are independent aftermarket spare parts built for compatibility with the VOLVO FH II. The catalogue is a live stock list filtered for the model; always confirm final fitment against the part's OEM number.
How do I select the correct part?
The most reliable method is to match the OEM/reference number on the original part you are replacing — or in your vehicle documents — against the number in the VADEN catalogue. The model and model year are a starting point; the exact choice is made by OEM number.
Which engines and generations does FH II cover?
In the catalogue, "FH II" refers to the new-generation cab unveiled in 2012: the 2012–2014 Euro 5 launch phase (D13A/D13C, D16G) and the Euro 6 line from 2013/2014 to the present (D13K, D16K and, from 2024, D17A). Because compatibility can vary by engine, take the engine code into account.
Which part groups can I find?
For the VOLVO FH II, the VADEN catalogue covers these groups: air brake compressors, clutch, cooling system, engine and brake system. The contents of each group update with live stock availability.
Can one part fit more than one FH generation?
Some parts are shared across different generations and engines, while others are specific to a particular phase or engine. Generation alone is not enough — always confirm cross-generation fitment using the OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, FH II and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
