VADEN Spare Parts for the Volvo FL6
VADEN Spare Parts for the Volvo FL6
The VOLVO FL6 is a medium-duty forward-control (COE) distribution and urban-delivery truck built from 1985 to 2006, spanning roughly 7-18 tonne GVW. VADEN offers 28 compatible part references for this model — search our live catalogue by OEM number to find the exact fit.
Products compatible with the Volvo FL6
The catalogue below is a live, filtered stock list of VADEN products compatible with the VOLVO FL6. VADEN is an independent aftermarket manufacturer, and the VOLVO brand and model name are referenced here solely to indicate compatibility; always confirm exact fitment against your vehicle's OEM or chassis number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Clutch servos and clutch-area components.
Go to category →Volvo FL6 generations
The VOLVO FL6 went through the three main production phases below; generation alone is not enough for exact fitment — always verify against the OEM or chassis number.
| Generation | Years | Engines |
|---|---|---|
| FL6 - First Phase (TD-series) | 1985-1994 | Volvo TD-series, approximately 5.5-litre inline-6 turbodiesel engines (period designation TD61 / TD63); roughly 150-210 hp depending on variant. |
| FL6 - D6A era (incl. Supercharged) | 1995-2000 | Volvo D6A, approximately 5.48-litre inline-6 turbodiesel; roughly 180-250 PS (132/162/184 kW). The top D6A250 combined a turbocharger with a belt-driven supercharger (compound charging) for strong low-end torque. Lighter sub-10-tonne FL6 variants could also take a 4.0-litre four-cylinder D4A engine from 1997. |
| FL6 - 2000 facelift (D6B, Euro 3) | 2000-2006 | Volvo D6B, approximately 5.5-litre turbocharged, intercooled inline-6 diesel; roughly 180-250 hp (Euro 3). |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Are VADEN spare parts compatible with the VOLVO FL6?
Yes. VADEN manufactures 28 part references compatible with the VOLVO FL6. VADEN is an independent aftermarket manufacturer; the VOLVO and FL6 names are used solely to indicate compatibility and remain trademarks of their respective owners.
How do I choose the correct VADEN part?
The most reliable method is matching your vehicle's OEM or chassis number against the OEM cross-reference field in the VADEN catalogue. Model and year are a helpful starting point, but guaranteed fitment always comes down to the OEM number.
Which VOLVO FL6 engines and generations are covered?
The catalogue can be filtered across all three production phases: the 1985-1994 TD-series (TD61/TD63), the 1995-2000 D6A era (including the Supercharged variant), and the 2000-2006 D6B (Euro 3) facelift. After selecting the relevant generation, confirm exact fitment with the OEM number.
Which part groups are available for the VOLVO FL6?
The VADEN catalogue for this model covers air brake compressors, brake system components, and clutch parts.
Can a part for one FL6 generation fit another generation?
Some parts may be shared across FL6 generations, but this cannot be assumed. Generation changes typically brought engine and chassis revisions, so before any cross-generation use, confirm that the OEM number matches exactly what is listed in the catalogue.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, FL6 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
