VADEN Spare Parts for the Volvo 9900
VADEN Spare Parts for the Volvo 9900
The VOLVO 9900 is Volvo Buses' flagship premium touring and intercity coach, distinguished by its signature "theatre floor" that raises rear seating for elevated passenger visibility, produced across two runs from 2001–2005 and again from 2007 to today. Find VADEN's 68+ compatible references in seconds with your OEM number.
Products compatible with the Volvo 9900
The catalogue below is a live, filtered view of current VADEN stock compatible with the VOLVO 9900. Narrow it down by part group and always confirm fitment with your OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Volvo 9900 generations
The VOLVO 9900 generations and engines are listed below; generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| First generation (Drögmöller-built) | 2001–2005 | Volvo B12B chassis; DH12 (D12-family) 12.1 L inline-6 diesel (~420 hp, offered in a 340–460 hp range), Euro 3 |
| Second generation (relaunch and facelift) | 2007–2012 | Volvo B12B with DH12E 12.1 L (420/460 hp, Euro 4/5), replaced in 2010 by the B13R with D13C 12.8 L inline-6 (up to 500 hp, Euro 5/EEV) |
| Third generation (Euro VI) | 2013–2017 | Volvo B11R with Euro VI D11K 10.8 L inline-6 (up to approximately 460 hp), Euro 6 |
| Fourth generation (2018 redesign) | 2018–present | At the May 2018 launch: Volvo B11R with D11K 10.8 L (up to approximately 460 hp), Euro 6; from 30 June 2022 the Euro VI B13R with D13K 12.8 L inline-6 (up to 500 hp) rejoined the range |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Do VADEN parts fit the VOLVO 9900?
Yes. VADEN manufactures independent aftermarket parts to OEM dimensions for the heavy-vehicle range including the VOLVO 9900; every product is listed with the OEM references it is compatible with, and fitment is confirmed through that number.
I only have an OEM number — is that enough to find a part?
It is. Entering your OEM number in the product search returns the compatible VADEN reference for the VOLVO 9900 directly. This is the most reliable way to match a part.
Which VOLVO 9900 generations and engines are covered?
The catalogue spans four generations from 2001 to today: the Drögmöller-built first generation (DH12), the 2007-2012 relaunch period (DH12E, later D13C), the 2013-2017 Euro VI period (D11K), and the post-2018 redesigned model (D11K, joined by the D13K from 2022). The correct reference depends on the specific engine and chassis.
Which part groups are available for the VOLVO 9900?
There are 68+ compatible references across air brake compressors, clutch, engine and cooling system. You can filter the catalogue by part group.
Will a part I bought for one generation fit another?
Not always. Engine families and chassis components can change between generations, so any cross-generation swap must be verified with the OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, 9900 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
