VADEN Spare Parts for the Volvo B7
VADEN Spare Parts for the Volvo B7
The VOLVO B7 is Volvo's family of 7-litre bus and coach chassis, built on the D7 inline-six turbodiesel and spanning everything from low-floor city bus chassis to rear-engined intercity and tourist coaches. VADEN supplies 35+ compatible references across Air Brake Compressors, Clutch and Cooling System part groups for the B7 family — confirm the exact match using your vehicle's OEM number.
Products compatible with the Volvo B7
The catalogue below is a live, filtered stock list of VADEN parts compatible with the VOLVO B7 chassis family. Always confirm exact fitment using the OEM number printed on your vehicle or the old part before ordering.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Volvo B7 generations
The VOLVO B7 family spans four distinct chassis variants; the table below summarizes the production years and D7 engine codes for each, but generation alone is not enough — always verify fitment against the OEM or chassis number.
| Generation | Years | Engines |
|---|---|---|
| B7R (rear-engined coach chassis) | 1997–2019 | D7A, D7B, D7C, D7E |
| B7L (low-floor city bus chassis) | 1998–2007 | D7C |
| B7TL (low-floor double-decker chassis) | 1999–2007 | D7C |
| B7RLE (low-entry city/suburban chassis) | 2001–2018 | D7C, D7E |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Which VOLVO B7 versions do VADEN parts fit?
VADEN's 35+ references for the VOLVO B7 cover air brake compressor, clutch and cooling system parts across all four chassis variants — B7R, B7L, B7TL and B7RLE. Because fitment varies by chassis type and production year, always confirm the exact match using the OEM number.
How do I find the right part, and where do I get the OEM number?
The OEM (original equipment) number is usually stamped on the old part or listed in the vehicle's documentation. Enter it in product search to find the matching VADEN part — this is far more reliable than matching by model name alone, since different generations and engines within the B7 family can use different OEM numbers.
What engines did the VOLVO B7 use, and does that affect part selection?
Yes. The entire B7 family runs on Volvo's 7-litre D7 inline-six turbodiesel: D7A, D7B, D7C (7.3 L) and the later D7E (7.1 L). Engine-linked components such as compressors and cooling parts can differ by engine code, so when searching for a part it helps to specify the engine along with the chassis type.
What VADEN part groups are available for this model?
VADEN's catalogue for the VOLVO B7 is organized into three groups: Air Brake Compressors, Clutch, and Cooling System. These cover critical functions such as pressurizing the air brake circuit, disengaging the powertrain, and keeping the engine within its operating temperature.
Does a B7RLE part fit a B7R, or vice versa?
Some components can be shared across generations and chassis types, since the B7RLE combines the B7L front section with the B7R rear section — but this does not mean automatic interchangeability. Cross-chassis fitment must always be confirmed by matching OEM numbers; visually similar parts across different chassis types can still carry different OEM numbers.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, B7 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
