VADEN Spare Parts for the Mercedes-Benz Touro (O 500)
VADEN Spare Parts for the Mercedes-Benz Touro (O 500)
Listed here as the Touro (O 500), the Mercedes-Benz O 500 is the Brazilian chassis-only, rear-engine bus and coach platform introduced in 2001 — bodied by external coachbuilders — spanning low-entry/high-floor city buses to intercity and long-distance touring coaches. Find any of VADEN's 75+ compatible references for this family in seconds with your OEM number.
Products compatible with the Mercedes-Benz Touro (O 500)
This catalogue is a live, filtered stock list of VADEN products compatible with the Touro (O 500). Always confirm fitment with your OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Mercedes-Benz Touro (O 500) generations
Generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| O 500 U / O 500 M (city & short-haul, rigid) | 2001–present (O 500 M from 2006) | OM906 (OM906LA, 6.4L, ~2001–2012, Euro II/III); OM926 (OM926LA, 7.2L, from 2012, Euro V) |
| O 500 R (intercity / charter, 4x2) | from the early years of the O 500 line | OM926 (OM926LA, 7.2L) as the mainstay; earlier/entry-level units OM906 (OM906LA, 6.4L) |
| O 500 RS / RSD / RSDD (long-distance coach) | 2004–present (RSDD from 2010) | OM457 (OM457LA, 12L, Euro III/V, up to ~430 hp) as the historic mainstay; OM460 (OM460LA, ~12.9L) from 2023 — Euro VI on the Brazilian domestic line, Euro 5 on some export coaches (not in VADEN's listed set) |
Mercedes-Benz Touro (O 500) engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Other Mercedes-Benz models
Related technical guides
Frequently Asked Questions
Do VADEN parts fit the Touro (O 500) chassis?
Yes — VADEN manufactures aftermarket parts to OEM dimensions for the O 500 U/M, R and RS/RSD/RSDD chassis families; every product is listed with the OEM numbers it is compatible with.
I only have an OEM number — is that enough?
It is. Entering your OEM number into the product search lists the compatible VADEN product for the Touro (O 500) directly.
Which engines and generations are covered?
The catalogue covers the O 500 U/M, R and RS/RSD/RSDD generations fitted with the OM906, OM926 and OM457 engines; each product page states which engine and chassis code it fits.
What part groups are in the catalogue?
There are 75+ Touro (O 500)-compatible references, concentrated in air brake compressors, clutch, cooling system, engine and fuel system parts.
Will a part bought for one generation fit another?
Not always — engine and chassis details can vary between generations; always verify with the OEM or chassis number before cross-fitting.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Mercedes-Benz, TOURO (O 500) and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
