VADEN Spare Parts for the Mercedes-Benz Citaro (O 530)
The Mercedes-Benz Citaro (O 530) is a full-size low-floor city bus, launched in 1997 as the successor to the O 405N. Find 99+ VADEN references compatible with OM457-, OM906- and OM926-powered Citaro buses by searching your OEM number.
Below is a live, filtered stock list of VADEN products compatible with the Mercedes-Benz Citaro (O 530). Each item is listed against the OEM numbers it is compatible with; confirm the correct fitment by OEM reference before ordering.
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →The Citaro (O 530) generations and their engine codes are summarized below; generation alone is not enough to select the right part — the vehicle's OEM or chassis number is what decides.
| Generation | Years | Engines |
|---|---|---|
| First generation (C1) — original | 1997–2005 | OM906hLA, OM457hLA (early units OM447hLA) |
| First generation (C1) — facelift | 2005/2006–2011 (Singapore export orders to 2016) | OM906hLA, OM926LA, OM457hLA |
| Second generation (C2) | 2011–present (VADEN coverage: early 2011–mid 2012) | At launch (May 2011–mid 2012): carried-over OM906 and OM457(h)LA (Euro V). From May 2012: OM936, OM936h, OM470 (Euro VI) |
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Yes. VADEN supplies air-brake compressors, engine, clutch, cooling-system and fuel-system parts compatible with OM457-, OM906- and OM926-powered Citaro (O 530) buses. Compatibility is application-based; each item is listed against the OEM numbers it is compatible with, and fitment should always be verified by the vehicle's OEM number before ordering.
The OEM number is the primary basis for selection. VADEN catalogues every reference against the OEM numbers it is compatible with, so matching your vehicle's OEM or chassis number to the listing is the reliable way to confirm fitment. The model or engine name alone is not enough to identify the correct part.
VADEN's coverage centres on the OM457, OM906 and OM926 engines and maps primarily to the first-generation (C1) O 530 (1997–2011, with Singapore export orders to 2016). Because the OM457 and OM906 were carried over into the early second-generation (C2) buses (May 2011–mid 2012), these parts also fit C2 units from that window. The Euro VI OM936/OM470 engines used from May 2012 onward fall outside VADEN's listed coverage.
For this model the VADEN catalogue includes air-brake compressors, engine parts, clutch, cooling-system and fuel-system groups — 99+ compatible VADEN references in total. Each group is listed against the OEM numbers it is compatible with, so you can confirm the exact part by OEM reference.
Application can differ between generations: the OM457 and OM906 parts fit both the first-generation C1 and the early (2011–mid 2012) C2, whereas the OM926 was used only in the first generation. For that reason a part's fitment should be confirmed by the vehicle's OEM or chassis number and the listed OEM reference, not by generation name alone.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Mercedes-Benz, CITARO (O 530) and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.