VADEN Spare Parts for the Mercedes-Benz Integro (O 550)
The Mercedes-Benz Integro (O 550) is a full-size, high-floor intercity and interurban line-service bus built by EvoBus from 1996 to 2018 for regional route and commuter operations. VADEN offers 83+ compatible aftermarket references for this model - find the exact fit by cross-checking your OEM number.
The list below is a live, filtered view of VADEN stock matched to the Integro (O 550). Availability updates in real time, so always confirm fitment against the OEM number printed on the part you are replacing.
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →The Integro (O 550) was built in two series over its life; use the table as a guide only, because generation alone does not confirm fitment - the OEM or chassis number decides.
| Generation | Years | Engines |
|---|---|---|
| First generation (O 550) | 1996-2006 | OM 447 hLA; OM 457 hLA (from 2001); OM 441 LA (V6) / OM 442 LA (V8) on Integro H |
| Facelift / second series (O 550) | 2005-2018 | OM 457 hLA (Euro 4/5, BlueTec/SCR); OM 936; OM 470 on long / higher-output variants |
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Yes. VADEN maintains 83+ aftermarket references matched to the Integro (O 550) across both its production series (1996-2018). VADEN is an independent manufacturer; the parts are engineered to fit the model but are not original Mercedes-Benz components, and the make and model names are used for compatibility reference only. Always confirm the exact reference by OEM number before ordering.
Locate the OEM (original) part number stamped on the component you are replacing, or take it from your parts documentation, and match it against the VADEN reference in the live catalogue above. The OEM number is the most reliable selector because a single model can carry several variants across engines, body lengths and model years.
The Integro (O 550) used the inline-six OM 447 hLA and OM 457 hLA in the first series (1996-2006), with the V-engine OM 441 LA / OM 442 LA on the Integro H, and the OM 457 hLA plus the Euro VI OM 936 and OM 470 in the facelift series (2005-2018). VADEN coverage centres on the mainstream diesel platforms; confirm your engine and variant by OEM number.
Current VADEN groups for the Integro (O 550) are air brake compressors (and compressor repair/spare parts), clutch, fuel system, engine and cooling system components. Air brake compressors make up the largest share of the compatible references.
Not automatically. The facelift series widened the body and moved to newer engines and SCR emissions, so many references differ between the two series and even between body lengths within a series. Do not assume cross-generation fitment - verify each part by its OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Mercedes-Benz, INTEGRO (O 550) and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.