VADEN Spare Parts for the Mercedes-Benz Atego 2
VADEN Spare Parts for the Mercedes-Benz Atego 2
The Atego 2 is a light/medium-duty distribution and urban-delivery truck built from 2004 to 2013 (roughly 6.5–16 t GVW). Find your match among 104+ compatible VADEN references in seconds with your OEM number.
Products compatible with the Mercedes-Benz Atego 2
Current stock compatible with the Atego 2 — narrow down by engine code. This list is filtered live; always confirm fitment with your OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Clutch servos and clutch-area components.
Go to category →VADEN components for the gearbox / transmission group.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Mercedes-Benz Atego 2 generations
Generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| Atego 2 — 2004 facelift (Euro 3) | 2004–2006 | OM904 LA (4-cyl, 4.25 L), OM906 LA (6-cyl, 6.37 L); OM926 LA (6-cyl, 7.2 L) on the heaviest classes |
| Atego 2 — BlueTec (Euro 4/Euro 5) | 2006–2010 | OM924 LA (4-cyl, 4.8 L), OM926 LA (6-cyl, 7.2 L) |
| Atego 2 — 2010 facelift (Euro 5/EEV) | 2010–2013 | OM924 LA (4-cyl, 4.8 L), OM926 LA (6-cyl, 7.2 L) |
Mercedes-Benz Atego 2 engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Do VADEN parts fit the Atego 2?
Yes — VADEN manufactures independent aftermarket parts to OEM dimensions for the Mercedes-Benz heavy-vehicle family including the Atego 2; every product is listed with the OEM numbers it is compatible with.
I only have an OEM number — is that enough?
It is. Typing the OEM number into the product search lists the compatible VADEN product for the Atego 2; always confirm fitment with that number.
Which engines and generations does the Atego 2 cover?
The catalogue spans the OM904, OM906, OM924 and OM926 families fitted to the Atego 2: OM904 LA and OM906 LA (with OM926 LA on the heaviest classes) in the 2004–2006 Euro 3 stage, then OM924 LA and OM926 LA with BlueTec from 2006 onward.
Which part groups are available for the Atego 2?
Compatible VADEN references cover air brake compressors, the cooling system, engine, clutch and transmission groups — all visible in the live stock list.
Will a part for a pre-2006 Atego 2 fit a post-2010 one?
Not always — the facelift stages and the switch to BlueTec changed the engine family and some components. Always verify the crossover with the OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Mercedes-Benz, ATEGO 2 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
