VADEN Spare Parts for the Mercedes-Benz Atego 3
VADEN Spare Parts for the Mercedes-Benz Atego 3
The Atego 3 is a Euro VI BlueEfficiency Power light/medium-duty distribution and urban-delivery truck built since 2013, with a gross vehicle weight of roughly 6.5-16 tonnes. Find your match among 32 compatible VADEN references in seconds with your OEM number.
Products compatible with the Mercedes-Benz Atego 3
Current stock compatible with the Atego 3 — narrow it down by part group. This list is filtered live; always confirm fitment with your OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Mercedes-Benz Atego 3 generations
Generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| Atego (first generation) | 1998-2004 | OM904 LA (4-cyl), OM906 LA (6-cyl) |
| Atego (second generation) | 2004-2013 | OM904 LA (4.3 L, 4-cyl), OM906 LA (6.4 L, 6-cyl); OM924 LA on the BlueTec Hybrid variant |
| Atego 3 (third generation, Euro VI) | 2013-present | OM934 (I4, 5.1 L, ~156-231 hp), OM936 (I6, 7.7 L, ~238-299 hp) |
Mercedes-Benz Atego 3 engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Do VADEN parts fit the Mercedes-Benz Atego 3?
Yes. VADEN manufactures independent aftermarket parts to OEM dimensions for the Mercedes-Benz heavy-vehicle family including the Atego 3; every product is listed with the OEM numbers it is compatible with.
I only have an OEM number — is that enough to find a part?
It is. Typing your OEM number into the product search lists the compatible VADEN product for the Atego 3; that is the most reliable way to get an exact match.
Which engines does the Atego 3 use, and does it affect part selection?
Yes, directly. The Atego 3 is built with the 5.1-litre four-cylinder OM934 and the 7.7-litre six-cylinder OM936, both Euro VI. VADEN's 32-part catalogue for this model is matched to these two engine codes.
Which part groups are available for the Atego 3?
32 compatible VADEN references span air brake compressors, clutch, brake system, cooling system and engine. Use the group filter to narrow the list.
Will a part for an earlier Atego (1998-2013) fit the Atego 3?
Usually not. The Atego and Atego 2 use the OM904/OM906/OM924/OM926 engine family, while the Atego 3 switched entirely to the OM934/OM936 Euro VI engines. Always verify cross-generation fitment with the OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Mercedes-Benz, ATEGO 3 and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
