Compatible parts for every Actros generation
Over 2,000 Mercedes-Benz-compatible VADEN references from MP1 to MP5. Find yours in seconds with your OEM number.
Current stock compatible with the Actros — narrow down by engine code.
The families where Actros-compatible references concentrate.
Complete compressors and repair kits
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group
Go to category →Servos and clutch-area components
Go to category →16 product families, 12,000+ references
Browse products →Generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| MP1–MP3 | 1996–2011 | OM501LA (V6), OM502LA (V8) |
| MP4 | 2011–2019 | OM470, OM471, OM473 (Euro VI) |
| MP5 / Actros L | 2019–… | OM470/OM471 3. generation |
Variants within the same generation can use different references. See the Actros maintenance guide for intervals and selection method.
Explore compatible VADEN parts by the engine families fitted to the Actros — a dedicated compatibility hub per engine.
VADEN's independent aftermarket parts program for the 11.9-litre OM 501 LA V6 diesel that powered the Mercedes-Benz Actros MP1, MP
OM501 compatible-parts hub →Aftermarket components for the 15.9 L OM502 V8, fitted to the Mercedes-Benz Actros (MP1/MP2/MP3), the Actros SLT heavy-haulage tra
OM502 compatible-parts hub →Aftermarket components compatible with the 10.7 L OM470 inline-six fitted to the Actros, Antos and Arocs trucks and the Tourismo,
OM470 compatible-parts hub →Compatible VADEN parts for the 12.8 L Euro VI inline-six: the complete EURO6 air-brake compressor and rebuild parts.
OM471 compatible-parts hub →Aftermarket components matched to the 15.6 L OM473 inline-six that powers the Mercedes-Benz Actros SLT, Arocs SLT and the top-rate
OM473 compatible-parts hub →VADEN aftermarket parts compatible with Atego, Antos, Arocs, Unimog, Econic and Citaro vehicles powered by the 7.7 L OM936 inline-
OM936 compatible-parts hub →Every part is produced to match original-equipment dimensions exactly.
Konya-based production, sales network across 7 continents.
Every product is listed with the OEM references it is compatible with.
Yes — VADEN manufactures aftermarket parts to OEM dimensions for the Mercedes-Benz heavy-vehicle family including the Actros; every product is listed with the OEM numbers it is compatible with.
It is. Typing the OEM number into the product search lists the compatible VADEN product; the cross-reference table also covers the most-searched numbers.
Mostly no — engine families and brake components change between generations. Always verify with the OEM number.
Type your OEM number into the product search; if there is no match, send your request through our network — the catalogue keeps growing.
Use the contact page to reach the nearest sales point.
Mercedes-Benz and Actros are registered trademarks of Daimler Truck AG, referenced here solely for compatibility/cross-reference purposes. VADEN is an independent aftermarket manufacturer; its products are not marketed as products of the trademark owner.