Mercedes-Benz ABS Sensor Ring OEM Number Cross Reference to VADEN Parts

Mercedes-Benz ABS Sensor Ring OEM Number Cross Reference to VADEN Parts

Mercedes-Benz ABS Sensor Ring OEM Number Cross Reference to VADEN Parts

Find the VADEN equivalent of a Mercedes-Benz ABS sensor ring by its OEM number. This page lists 34 OEM numbers matched to 13 VADEN products for commercial vehicles.

Mercedes-Benz ABS sensor ring OEM numbers with VADEN equivalents

The ABS sensor ring turns with the wheel; the ABS sensor reads its teeth to measure wheel speed, so the ABS control unit can reduce brake pressure before the wheel locks. Search the table for the Mercedes-Benz OEM number from the part or its documentation; the VADEN part number in the same row links to the product page. These are aftermarket parts, not original Mercedes-Benz parts: confirm fitment with the OEM number and product page data, and follow the vehicle manufacturer's service documentation.

Related pages

Category: ABS Sensors

All VADEN parts in this category with photos and technical data.

Go to category →
ABS Wheel Speed Sensor & ECU: Faults, Replacement & Care

For ABS sensor fault symptoms, testing and replacement steps, read our ABS wheel speed sensor and ABS ECU guide.

Read the guide →
VADEN parts for Mercedes-Benz

Mercedes-Benz models, engines and part groups covered by VADEN.

Mercedes-Benz parts →
Mercedes-Benz OEM cross reference

All Mercedes-Benz part groups with OEM number tables.

All Mercedes-Benz OEM pages →

Other Mercedes-Benz OEM cross reference pages

Air Brake Compressor Repair Kits Fan Air Compressor Water Pumps Flexible Pipe Engine Oil Cooler Master Cylinders Gearbox Housing Steering Pumps Brake Caliper Repair Kits Clutch Servo Pressure Limiting Valves Brake System: other parts Unloader Valves Air Dryer Valves Engine: other parts Engine Oil Filter Radiator Shifting Cylinders Foot Brake Valves Oil Sumps Oil Pumps Relay Valves Exhaust Manifolds Exhaust Brake Fuel Filters Flywheel Housings Cylinder Head Air Processing Units Crankcase Brake Cylinder Split Cylinders ALB Load Sensing Valves Trailer Control Valves Cab Tilting Release Bearings Exhaust Gas Flaps Brake Master Cylinders Gearbox: other parts Release Forks Injector Pump Manual Feed Pumps Brake Caliper Carrier Brake System Connection Components Pipe Engine Steering 4-Circuit Protection Valves ECAS Solenoid Valves Lever Actuators Injector Pipe Suspension: other parts Pressure Boosters Turbo Retarder Fuel System: other parts Cabin: other parts Clutch: other parts Cooling System: other parts

Frequently asked questions

How do I find the VADEN part for a Mercedes-Benz ABS sensor ring OEM number?

Read the OEM number from the old ring or the parts documentation, then search for it in the table on this page or in the site search. The VADEN part number in the same row is the matching product; open its product page and check the listed OEM numbers and product data before ordering.

Should the ABS sensor ring be checked when the ABS sensor is replaced?

Yes. A cracked, corroded or loose ring, or one with damaged teeth, gives an irregular speed signal, so a new sensor alone may not clear an ABS fault. Inspect the ring teeth and seating, position the sensor as the service documentation describes, and replace the ring if it is damaged.

Are VADEN ABS sensor rings original Mercedes-Benz parts?

No. VADEN ABS sensor rings are aftermarket parts, not original Mercedes-Benz parts. The Mercedes-Benz OEM number is given only for cross reference; confirm compatibility with the OEM number and the product page data, and follow the vehicle manufacturer's service documentation.

Top Scroller