Mercedes-Benz Brake Cylinder Hose: OEM to VADEN Cross Reference

Mercedes-Benz Brake Cylinder Hose: OEM to VADEN Cross Reference

Mercedes-Benz Brake Cylinder Hose: OEM to VADEN Cross Reference

Have the Mercedes-Benz OEM number from your brake cylinder hose? Look it up in the table below to find the equivalent VADEN part, then confirm the match on the product page before ordering.

Mercedes-Benz brake cylinder hose OEM numbers and VADEN equivalents

The brake cylinder hose carries compressed air from the brake line to the brake cylinder at the wheel and flexes as the axle and suspension move. Each row of the table pairs a Mercedes-Benz OEM number with its VADEN part number, and both link to the product pages. The match is based on our catalog, so check the OEM number and the technical data on the product page before you order.

Related pages

Category: Brake Cylinder

All VADEN parts in this category with photos and technical data.

Go to category →
Brake Chamber, Diaphragm & Hose

How brake chambers, diaphragms and hoses work, and how to spot wear and air leaks.

Read the guide →
VADEN parts for Mercedes-Benz

Mercedes-Benz models, engines and part groups covered by VADEN.

Mercedes-Benz parts →
Mercedes-Benz OEM cross reference

All Mercedes-Benz part groups with OEM number tables.

All Mercedes-Benz OEM pages →

Other Mercedes-Benz OEM cross reference pages

Air Brake Compressor Repair Kits Fan Air Compressor Water Pumps Flexible Pipe Engine Oil Cooler Master Cylinders Gearbox Housing Steering Pumps Brake Caliper Repair Kits Clutch Servo Pressure Limiting Valves Brake System: other parts Unloader Valves Air Dryer Valves Engine: other parts Engine Oil Filter Radiator Shifting Cylinders Foot Brake Valves Oil Sumps Oil Pumps Relay Valves Exhaust Manifolds Exhaust Brake Fuel Filters Flywheel Housings Cylinder Head Air Processing Units Crankcase Split Cylinders ALB Load Sensing Valves Trailer Control Valves Cab Tilting Release Bearings Exhaust Gas Flaps Brake Master Cylinders Gearbox: other parts Release Forks Injector Pump Manual Feed Pumps Brake Caliper Carrier Brake System Connection Components Pipe ABS Sensors Engine Steering 4-Circuit Protection Valves ECAS Solenoid Valves Lever Actuators Injector Pipe Suspension: other parts Pressure Boosters Turbo Retarder Fuel System: other parts Cabin: other parts Clutch: other parts Cooling System: other parts

Frequently asked questions

How do I find the VADEN part for a Mercedes-Benz brake cylinder hose OEM number?

Read the OEM number on your hose or in the vehicle's parts documentation and find it in the Mercedes-Benz OEM column of the table. The VADEN part number in the same row is the equivalent; open its product page to check the technical data.

When should a brake cylinder hose be replaced?

Replace it if it shows cracks, chafing, swelling or damaged fittings, or if you hear an air leak near the hose when the brakes are applied. Make sure the hose does not rub against the chassis; inspection and replacement intervals are set by the vehicle manufacturer's service documentation.

Are VADEN parts original Mercedes-Benz parts?

No. VADEN parts are aftermarket replacement parts, and the Mercedes-Benz name and OEM numbers are used only to show compatibility. Confirm the match by OEM number and the technical data on the product page before ordering; the vehicle manufacturer's service documentation is the reference for fitting.

Top Scroller