Mercedes-Benz Clutch Release Forks: OEM to VADEN Cross Reference

Mercedes-Benz Clutch Release Forks: OEM to VADEN Cross Reference

Mercedes-Benz Clutch Release Forks: OEM to VADEN Cross Reference

Match the Mercedes-Benz OEM number on a clutch release fork, fork shaft, pivot pin, bushing or repair kit to the equivalent VADEN part: 31 OEM numbers against 15 VADEN parts.

Mercedes-Benz OEM Numbers and VADEN Equivalents for Clutch Release Forks

The release fork transfers the clutch actuator's movement to the release bearing so the clutch disengages when the pedal is pressed; its shaft, pivot pin and bushings carry that load in commercial vehicles. Find the Mercedes-Benz OEM number of your part in the left column; the right column leads to the matching VADEN aftermarket part. Before ordering, confirm the OEM number and the technical data on the product page; the vehicle manufacturer's service documentation is decisive.

Release Fork Pivot Pin: Mercedes-Benz OEM numbers and VADEN equivalents (6)
Mercedes-Benz OEM numberVADEN part number
00025400170101 237
65525018130101 236
65525402060101 236
A00025400170101 237
A65525018130101 236
A65525402060101 236
Release Fork Bushing: Mercedes-Benz OEM numbers and VADEN equivalents (4)
Mercedes-Benz OEM numberVADEN part number
00025403350101 238
00299215010101 239
A00025403350101 238
A00299215010101 239
Release Fork Shaft: Mercedes-Benz OEM numbers and VADEN equivalents (2)
Mercedes-Benz OEM numberVADEN part number
00025409070102 158
A00025409070102 158

Related pages

Category: Release Forks

All VADEN parts in this category with photos and technical data.

Go to category →
Clutch Fork: Fault, Replacement and Maintenance Guide

Clutch fork fault symptoms, replacement steps and maintenance advice.

Read the guide →
VADEN parts for Mercedes-Benz

Mercedes-Benz models, engines and part groups covered by VADEN.

Mercedes-Benz parts →
Mercedes-Benz OEM cross reference

All Mercedes-Benz part groups with OEM number tables.

All Mercedes-Benz OEM pages →

Other Mercedes-Benz OEM cross reference pages

Air Brake Compressor Repair Kits Fan Air Compressor Water Pumps Flexible Pipe Engine Oil Cooler Master Cylinders Gearbox Housing Steering Pumps Brake Caliper Repair Kits Clutch Servo Pressure Limiting Valves Brake System: other parts Unloader Valves Air Dryer Valves Engine: other parts Engine Oil Filter Radiator Shifting Cylinders Foot Brake Valves Oil Sumps Oil Pumps Relay Valves Exhaust Manifolds Exhaust Brake Fuel Filters Flywheel Housings Cylinder Head Air Processing Units Crankcase Brake Cylinder Split Cylinders ALB Load Sensing Valves Trailer Control Valves Cab Tilting Release Bearings Exhaust Gas Flaps Brake Master Cylinders Gearbox: other parts Injector Pump Manual Feed Pumps Brake Caliper Carrier Brake System Connection Components Pipe ABS Sensors Engine Steering 4-Circuit Protection Valves ECAS Solenoid Valves Lever Actuators Injector Pipe Suspension: other parts Pressure Boosters Turbo Retarder Fuel System: other parts Cabin: other parts Clutch: other parts Cooling System: other parts

Frequently asked questions

How do I find the VADEN part for a Mercedes-Benz release fork OEM number?

Look for the OEM number on the part or its label and find it in the Mercedes-Benz OEM number column of the table. The VADEN part number in the same row opens the matching product page.

Should the pivot pin and bushings be replaced together with the release fork?

Worn bushings or a worn pivot pin let the fork move unevenly, which can cause incomplete disengagement or uneven release bearing wear, so many workshops inspect them at the same time and use a repair kit where one is listed. Follow the vehicle manufacturer's service documentation for inspection and replacement.

Are VADEN parts original Mercedes-Benz parts?

No. VADEN parts are aftermarket parts, not original Mercedes-Benz parts; the Mercedes-Benz name and OEM numbers are given only to show compatibility. Confirm the OEM number and the product data before ordering; the vehicle manufacturer's service documentation is decisive.

Top Scroller