Mercedes-Benz Injector Pipe: OEM Number to VADEN Cross Reference

Mercedes-Benz Injector Pipe: OEM Number to VADEN Cross Reference

Mercedes-Benz Injector Pipe: OEM Number to VADEN Cross Reference

Match the Mercedes-Benz OEM number on an injector pipe or high-pressure injection line to its VADEN equivalent: 28 OEM numbers cross-referenced to 4 VADEN parts.

Mercedes-Benz OEM Numbers and VADEN Equivalents for Injector Pipes

Injector pipes are the steel high-pressure lines that carry fuel from the injection pump or common rail to each injector of a commercial vehicle diesel engine. Find the Mercedes-Benz OEM number in the left column; the VADEN part number in the same row leads to the matching part. VADEN parts are aftermarket, not original Mercedes-Benz parts: confirm the OEM number and product page data before ordering, and follow the vehicle manufacturer's service documentation.

Related pages

Category: Injector Pipe

All VADEN parts in this category with photos and technical data.

Go to category →
Diesel Injection Line & Fuel Pipe: Faults, Repair, Maintenance

Symptoms of a leaking or cracked injection line, replacement steps and maintenance advice.

Read the guide →
VADEN parts for Mercedes-Benz

Mercedes-Benz models, engines and part groups covered by VADEN.

Mercedes-Benz parts →
Mercedes-Benz OEM cross reference

All Mercedes-Benz part groups with OEM number tables.

All Mercedes-Benz OEM pages →

Other Mercedes-Benz OEM cross reference pages

Air Brake Compressor Repair Kits Fan Air Compressor Water Pumps Flexible Pipe Engine Oil Cooler Master Cylinders Gearbox Housing Steering Pumps Brake Caliper Repair Kits Clutch Servo Pressure Limiting Valves Brake System: other parts Unloader Valves Air Dryer Valves Engine: other parts Engine Oil Filter Radiator Shifting Cylinders Foot Brake Valves Oil Sumps Oil Pumps Relay Valves Exhaust Manifolds Exhaust Brake Fuel Filters Flywheel Housings Cylinder Head Air Processing Units Crankcase Brake Cylinder Split Cylinders ALB Load Sensing Valves Trailer Control Valves Cab Tilting Release Bearings Exhaust Gas Flaps Brake Master Cylinders Gearbox: other parts Release Forks Injector Pump Manual Feed Pumps Brake Caliper Carrier Brake System Connection Components Pipe ABS Sensors Engine Steering 4-Circuit Protection Valves ECAS Solenoid Valves Lever Actuators Suspension: other parts Pressure Boosters Turbo Retarder Fuel System: other parts Cabin: other parts Clutch: other parts Cooling System: other parts

Frequently asked questions

How do I find the VADEN part for a Mercedes-Benz injector pipe OEM number?

Look up the OEM number from the pipe, its tag or the parts list in the Mercedes-Benz OEM number column of the table. The VADEN part number in the same row opens the product page, where you can check the OEM numbers and part data before ordering.

Can an injector pipe be reused after it has been removed?

Injector pipes seal on cone-shaped ends that deform when the unions are tightened, so many manufacturers specify a new pipe after removal. Route the pipe without forcing it into alignment, tighten the unions as the service documentation specifies and check for fuel leaks after start-up.

Are VADEN injector pipes original Mercedes-Benz parts?

No. VADEN parts are aftermarket parts, not original Mercedes-Benz parts; the OEM number is used only as a cross reference. Fitment is confirmed through the OEM number and the product page data, and the vehicle manufacturer's service documentation remains the reference.

Top Scroller