Mercedes-Benz Clutch Release Bearings: OEM to VADEN Cross Reference

Mercedes-Benz Clutch Release Bearings: OEM to VADEN Cross Reference

Mercedes-Benz Clutch Release Bearings: OEM to VADEN Cross Reference

Match the Mercedes-Benz OEM number on a clutch release bearing to its VADEN aftermarket equivalent: 52 OEM numbers, 4 VADEN parts.

Mercedes-Benz release bearing OEM numbers and VADEN equivalents

The clutch release bearing transfers the force of the clutch actuation to the pressure plate, so the clutch disengages smoothly when the driver presses the pedal. Read the OEM number on the bearing or its packaging and look it up in the Mercedes-Benz OEM number column; the VADEN aftermarket part number in the same row links to the matching product. Before ordering, confirm the OEM number and the technical data on the product page; the vehicle manufacturer's service documentation is decisive.

Related pages

Category: Release Bearings

All VADEN parts in this category with photos and technical data.

Go to category →
Clutch Release Bearing: Fault, Replacement and Care Guide

Fault symptoms, replacement steps and care tips for the clutch release bearing.

Read the guide →
VADEN parts for Mercedes-Benz

Mercedes-Benz models, engines and part groups covered by VADEN.

Mercedes-Benz parts →
Mercedes-Benz OEM cross reference

All Mercedes-Benz part groups with OEM number tables.

All Mercedes-Benz OEM pages →

Other Mercedes-Benz OEM cross reference pages

Air Brake Compressor Repair Kits Fan Air Compressor Water Pumps Flexible Pipe Engine Oil Cooler Master Cylinders Gearbox Housing Steering Pumps Brake Caliper Repair Kits Clutch Servo Pressure Limiting Valves Brake System: other parts Unloader Valves Air Dryer Valves Engine: other parts Engine Oil Filter Radiator Shifting Cylinders Foot Brake Valves Oil Sumps Oil Pumps Relay Valves Exhaust Manifolds Exhaust Brake Fuel Filters Flywheel Housings Cylinder Head Air Processing Units Crankcase Brake Cylinder Split Cylinders ALB Load Sensing Valves Trailer Control Valves Cab Tilting Exhaust Gas Flaps Brake Master Cylinders Gearbox: other parts Release Forks Injector Pump Manual Feed Pumps Brake Caliper Carrier Brake System Connection Components Pipe ABS Sensors Engine Steering 4-Circuit Protection Valves ECAS Solenoid Valves Lever Actuators Injector Pipe Suspension: other parts Pressure Boosters Turbo Retarder Fuel System: other parts Cabin: other parts Clutch: other parts Cooling System: other parts

Frequently asked questions

How do I find the VADEN release bearing for a Mercedes-Benz OEM number?

Look up the OEM number from the bearing or its packaging in the Mercedes-Benz OEM number column of the table. The VADEN part number in the same row opens the matching product page.

What signs point to a worn clutch release bearing?

A whirring or squealing noise that changes when the clutch pedal is pressed, a rough pedal feel or difficult gear changes can point to a worn release bearing. The release bearing is usually checked and replaced together with the clutch, following the vehicle manufacturer's service documentation.

Are VADEN release bearings original Mercedes-Benz parts?

No. VADEN parts are aftermarket replacement parts; the Mercedes-Benz name and OEM numbers are shown only to indicate compatibility. Confirm the OEM number and product data before ordering, as the vehicle manufacturer's service documentation is decisive.

Top Scroller