VADEN Parts for the Mercedes-Benz OM502 Engine
Aftermarket components for the 15.9 L OM502 V8, fitted to the Mercedes-Benz Actros (MP1/MP2/MP3), the Actros SLT heavy-haulage tractor and the Travego coach. Search by OEM number to match compatible VADEN parts across the clutch, cooling, transmission, engine and fuel-system groups.
The parts below are listed against the OEM numbers they are compatible with for OM502-powered vehicles. Confirm the correct fitment by OEM reference before ordering.
Clutch Servo
Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Clutch Servo
0101 081, Water Pump
( 0101 082 ), Water Pump
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
0101 146, Water Pump
0101 128, Water Pump
0101 127, Water Pump
0101 134, Water Pump
0101 145, Water Pump
0101 083, Water Pump
0101 129, Water Pump
0101 140, Water Pump
Repair Kit, Retarder
Solenoid Valve Repair Kit, Retarder
Solenoid Valve, Retarder
Solenoid Valve Repair Kit, Retarder
Solenoid Valve Repair Kit, Retarder
Lever Actuator
Repair Kit, Lever Actuator
Repair Kit, Lever Actuator
Repair Kit, Lever Actuator
Oil Pump
Oil Pump
Flywheel Housing
Oil Filter Element, Oil Filter
Cover, Oil Cooler
Cover, Oil Filter
Water Separator, Fuel Filter
Water Separator, Fuel Filter
Hand Pump, Manual Feed Pump
Cover, Fuel Filter
Hand Pump, Manual Feed Pump
Cartridge, Air Dryer Valve
Cartridge, Air Dryer Valve
VADEN supplies the OM502 application as an independent aftermarket manufacturer, with 55 compatible references in the catalogue; the widest coverage is in the clutch and cooling-system groups. Every reference is listed against its compatible OEM numbers; verify fitment by OEM reference before ordering.
The largest VADEN group compatible with the OM502 application (17 references): clutch kit and related driveline components engineered to OEM dimensions for the V8's high-torque power transmission. Each reference is listed against its compatible OEM numbers; confirm fitment by OEM reference before ordering.
Go to category →16 VADEN references for the OM502 cooling circuit, covering coolant circulation and thermal-management components suited to the V8's high heat load. Manufactured to OEM dimensions; each part is listed against its compatible OEM numbers, so select by OEM reference before ordering.
Go to category →9 VADEN references for the OM502 driveline, providing power-transmission components to OEM dimensions for heavy commercial-vehicle duty. Each reference is listed against its compatible OEM numbers; verify fitment by OEM reference before ordering.
Go to category →6 VADEN references in the OM502 engine group, used during scheduled maintenance and related engine work. Each part is listed against its compatible OEM numbers; confirm by OEM reference before ordering.
Go to category →5 VADEN references for the OM502 fuel system, matched to its PLD unit-pump feed to maintain clean fuel delivery. Manufactured to OEM dimensions and listed against their compatible OEM numbers; select by OEM reference before ordering.
Go to category →Browse all 55 VADEN references listed as compatible with OM502-powered vehicles across the clutch, cooling, transmission, engine and fuel-system groups. Every reference carries the OEM numbers it matches; always verify fitment by OEM reference before ordering.
Go to category →Reference data for the Mercedes-Benz OM502 heavy-duty V8 across its production generations. These values are provided to identify the engine, not to select parts; selection is always confirmed by OEM number.
| Specification | Value |
|---|---|
| Engine type | V8 (90-degree vee), 4-stroke water-cooled direct-injection diesel, 4 valves per cylinder (OM 500 series; the OM502 is the V8, the OM501 the V6) |
| Displacement | 15.9 L (15,928 cc) |
| Bore x stroke | 130 mm x 150 mm |
| Power range | Truck V8s 375-440 kW (510-598 hp); 450 kW (612 hp) Black Edition flagship; 350 kW (476 hp) base rating in coaches. Family ceiling incl. industrial 480 kW (653 hp) |
| Torque range | Approx. 2,100-3,000 Nm; the top 440 kW/598 hp truck variant delivers 2,800 Nm at ~1,080 rpm; peak torque occurs at ~1,080 rpm |
| Emissions | Euro II, III, IV and V (BlueTec SCR / AdBlue exhaust aftertreatment from Euro IV/V onward) |
| Injection | Electronically controlled PLD unit-pump system (Pumpe-Leitung-Duese); one plug-in unit pump per cylinder up to ~1,600 bar, camshaft-driven. Not common rail |
| Turbocharging | Two exhaust-gas turbochargers (one per cylinder bank) with charge-air cooling; not a turbo-compound engine |
| Introduction year | 1996 |
| Generations | MP1 Euro II/III (1996-2002/03); MP2 Euro IV/V BlueTec (2003-2008); MP3 Euro V BlueTec (2008-2011) |
The OM502 15.9 L V8 was fitted across Mercedes-Benz heavy trucks, premium coaches and industrial applications. The list below states the engine applications; VADEN fitment is compatibility-based and must be verified by OEM or chassis number for each vehicle.
First-generation heavy truck, 1996-2002/03, which introduced the OM501 V6 and OM502 V8; the top-power tractors used the OM502 V8, offered from the 1996 launch.
Actros compatibility hub →Second- and third-generation heavy trucks, 2003-2011, offering the OM502 V8 in the highest 510-598 hp ratings (612 hp Black Edition) for demanding long-haul work.
Actros compatibility hub →Flagship heavy-haulage tractor for oversized and abnormal loads at very high gross combination weights, powered by the top OM502 LA V8 variants.
Actros compatibility hub →Premium touring and long-distance coach; the top version was offered with the OM502 LA V8 rated at 350 kW (476 hp), alongside inline-six options.
Premium high-decker touring coaches (EvoBus) that shared major driveline components with the Travego and offered the OM502 V8 as the top engine option before the range moved to the inline-six. (Medium confidence on exact model coverage.)
The OM502 LA was also sold as a stationary (genset) and mobile-machinery engine in ratings up to ~480 kW; the upper end of the published power band reflects these off-highway ratings rather than truck use.
VADEN parts are produced to OEM dimensions for a direct fit with the original equipment. Every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number. This page groups compatible VADEN parts by engine identity.
Yes. VADEN supplies clutch, cooling-system, transmission, engine and fuel-system parts compatible with OM502 V8-powered vehicles such as the Actros (MP1/MP2/MP3), the Actros SLT and the Travego. Compatibility is application-based; each reference is listed against the OEM numbers it is compatible with, and fitment should always be verified by OEM number before ordering.
The OEM number is the primary way to select the correct part. VADEN catalogues every reference against the OEM numbers it is compatible with, so matching your vehicle's OEM or chassis reference to the listing is the reliable method to confirm fitment before ordering.
The OM502 15.9 L V8 was used from the first-generation Actros (MP1, 1996) through the Actros MP2/MP3 heavy trucks (510-598 hp, 612 hp Black Edition), the Actros SLT heavy-haulage tractor and the Travego coach (476 hp). It was also offered in the Setra TopClass 400 series and in industrial applications.
The VADEN catalogue lists 55 compatible references for the OM502 application across five groups: clutch (17), cooling system (16), transmission (9), engine (6) and fuel system (5). The widest coverage is in the clutch and cooling groups, and every group is listed against its compatible OEM numbers.
No. Both belong to the OM 500 series, but the OM502 is the V8 while the OM501 is the V6. In its 15.9 L V8 configuration the OM502 powers the highest-output Actros and heavy-haulage applications. Parts should be selected by the vehicle's OEM number rather than by engine code alone.
Use the OEM-number search or the cross-reference table on this page to identify the matching VADEN references, then order through your VADEN distributor or contact VADEN directly. Confirm fitment by OEM number before placing the order.
VADEN is an independent aftermarket manufacturer. Mercedes-Benz, OM502, Actros, Actros SLT, Travego and Setra are registered trademarks of their respective owners, named here solely for compatibility and cross-reference purposes. VADEN parts are not original equipment and carry no affiliation with, or endorsement by, the vehicle manufacturer. Every reference is listed against the OEM numbers it is compatible with; selection should always be verified by OEM number before ordering.