VADEN Spare Parts for the Volvo FM III
VADEN Spare Parts for the Volvo FM III
The VOLVO FM III (2010-2013) is a heavy-duty rigid truck and tractor unit built for regional distribution, general haulage and construction-support transport. VADEN offers 24 compatible parts across the cooling system and engine groups for this model — find the exact match for your truck by OEM number.
Products compatible with the Volvo FM III
The catalogue below is a live, filterable list of VADEN parts currently in stock for the VOLVO FM III. Always confirm exact fitment using the OEM number on your vehicle or the part you are replacing.
Featured part groups
Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Volvo FM III generations
The table below summarises this phase of the Volvo FM range, known in independent aftermarket catalogues as 'version 3'; however, generation alone is not enough — exact part fitment is determined by chassis number and OEM number.
| Generation | Years | Engines |
|---|---|---|
| FM III (Version 3) | 2010–2013 | D11C (10.8 L; 330–450 hp), D13C (12.8 L; 420–500 hp) |
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
What parts does VADEN offer for the VOLVO FM III?
VADEN supplies 24 compatible parts for the VOLVO FM III (2010-2013), spanning the cooling system and engine groups. Always confirm exact fitment using the OEM number.
How do I choose the correct VADEN part?
The most reliable method is to take the OEM number printed on the part you are replacing, or found in your vehicle documentation, and use it in product search. The model name alone does not guarantee an exact match — the OEM number is the final confirmation.
Which engines did the VOLVO FM III use?
This generation was built with the Euro 5/EEV-rated D11C (10.8 litre, 330-450 hp) and D13C (12.8 litre, 420-500 hp) engines. VADEN's cooling system and engine parts vary depending on which of these engines your truck has.
What does 'FM III' actually mean?
'FM III', or 'version 3', is an independent-aftermarket catalogue term for Volvo's 2010-2013 Euro 5/EEV facelift phase of the FM; it differs from Volvo's own official generation naming. When searching for parts, use this period together with the OEM number for accuracy.
Can a part fit FM generations outside FM III?
Some cooling system and engine parts may be shared with neighbouring generations (such as the earlier Euro 4 phase or the later Euro 6 'FM IV') via a common OEM number, but this should never be assumed — always confirm fitment by OEM number rather than by generation name alone.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Volvo, FM III and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
