VADEN Spare Parts for the Renault Trucks Magnum
VADEN Spare Parts for the Renault Trucks Magnum
The RENAULT TRUCKS MAGNUM is an aerodynamic, cab-over-engine heavy-duty tractor unit built for international long-haul transport. VADEN offers 54 parts compatible with this model in a live catalogue you can search by OEM number.
Products compatible with the Renault Trucks Magnum
The list below is a live, filtered stock catalogue of VADEN parts compatible with the RENAULT TRUCKS MAGNUM; always confirm exact fitment using the OEM number. VADEN is an independent aftermarket manufacturer, and the RENAULT TRUCKS and MAGNUM names are used solely to indicate compatibility and remain the property of their respective trademark owners.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Clutch servos and clutch-area components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Renault Trucks Magnum generations
The table below summarizes the MAGNUM's four generations; generation alone is not enough to select a part, so always confirm fitment against the OEM or chassis number.
| Generation | Years | Engines |
|---|---|---|
| Renault AE | 1990–1997 | Renault MIDR inline-six turbodiesel (AE 380 / AE 430) and Mack E9 V8 (AE 500, approx. 503 hp) — pre-E-Tech, pre-DXi |
| Renault Magnum (first Magnum, pre-E-Tech) | 1997–2001 | Renault/Mack-derived inline-six diesel (Euro 2 era); the Mack V8 was phased out — pre-E-Tech |
| Renault Magnum E-Tech | 2001–2006 | E-Tech (Mack E7-derived, approx. 12-litre electronically-controlled inline-six, Euro 3), approx. 400 / 440 / 480 hp |
| Renault Magnum DXi | 2006–2013 | DXi 13 — Volvo-derived, approx. 12.8-litre straight-six, 440 / 480 / 500 / 520 hp, Euro 4 and Euro 5 |
Renault Trucks Magnum engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
What part groups does VADEN's 54-part range for the RENAULT TRUCKS MAGNUM cover?
VADEN's 54 parts compatible with the RENAULT TRUCKS MAGNUM span five groups: Air Brake Compressors, Cooling System, Clutch, Engine and Brake System. Browse the filtered catalogue on this page for the full list.
How do I choose the correct VADEN part for my MAGNUM?
The most reliable method is entering your vehicle's OEM (original equipment) number or chassis number into VADEN's catalogue search. Generation and model year are useful guides, but exact fitment should always be confirmed by the OEM number, since specifications can vary within the same generation.
Which MAGNUM engines does VADEN's parts data cover?
VADEN's engine data is built around the DXi family, corresponding to the 2006-2013 Magnum DXi generation (DXi 13). Earlier engines used in the AE, first Magnum, and Magnum E-Tech generations (MIDR, Mack E9, E-Tech, and so on) fall outside VADEN's current 'DXi' engine data; for those vehicles, confirm fitment separately using the OEM number.
Do these parts apply to every generation of the RENAULT TRUCKS MAGNUM?
No, generation alone is not enough. The RENAULT TRUCKS MAGNUM was produced from 1990 to 2013 across four distinct generations (AE, Magnum, Magnum E-Tech, Magnum DXi), each with different engine and equipment options. Fitment should always be verified using the OEM or chassis number.
Can a single part fit more than one generation?
Yes, some parts may fit multiple generations where platforms or components were shared. This varies part by part, so always check the OEM number match on VADEN's catalogue page rather than relying on the generation name alone.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Renault Trucks, MAGNUM and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
