VADEN Spare Parts for the Renault Trucks Kerax
VADEN Spare Parts for the Renault Trucks Kerax
The RENAULT TRUCKS KERAX is a heavy-duty construction and vocational truck, built as a rigid chassis or tractor unit for tipper, concrete mixer and heavy-haulage work. VADEN offers over 54 compatible spare part references for this model, searchable by OEM number.
Products compatible with the Renault Trucks Kerax
This catalogue is a live, filtered stock listing of VADEN parts compatible with the RENAULT TRUCKS KERAX; VADEN is an independent aftermarket spare parts manufacturer, and RENAULT TRUCKS is a trademark of its respective owner, referenced here solely to indicate compatibility. Always confirm fitment for your vehicle using the chassis or OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Clutch servos and clutch-area components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Renault Trucks Kerax generations
The generation table below summarizes KERAX production phases and engine families; generation alone is not sufficient — always confirm fitment using the chassis or OEM number.
| Generation | Years | Engines |
|---|---|---|
| KERAX (Launch Generation) | 1997–2006 | MIDR 06.20.45 (9.8 L inline-six, Euro II); from 2000, common-rail dCi 11 (11.1 L inline-six, Euro III) |
| KERAX (2006 DXi Generation) | 2006–2013 | DXi 11 (10.8 L, Euro III/IV; later 11.1 L, Euro V from 2009); DXi 13 (12.99 L) offered as the higher-output option on tippers |
Renault Trucks Kerax engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Are VADEN parts for the RENAULT TRUCKS KERAX compatible with all model years?
VADEN's catalogue lists over 54 compatible references for the KERAX, but compatibility depends on the specific chassis configuration and engine code. Always verify fitment using the OEM number.
How do I find the correct VADEN part for my KERAX?
Search the catalogue using your vehicle's OEM (original) part number — this is the most reliable way to match a part, independent of model year or generation.
Which engines does the VADEN KERAX catalogue cover?
The catalogue's compatibility data is keyed to the DXi 11 and DXi 13 engines used in the 2006–2013 KERAX generation. For earlier MIDR 06.20.45 or dCi 11 powered units (1997–2006), confirm fitment by OEM number.
What part groups are available for the KERAX?
The VADEN catalogue for the KERAX includes air brake compressors, cooling system components, clutch parts, engine parts and brake system parts.
Can the same part fit multiple KERAX generations?
Some parts may be shared across generations, but this is not guaranteed. Always confirm compatibility using the chassis or OEM number rather than the generation alone.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Renault Trucks, KERAX and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
