VADEN Spare Parts for the Iveco Trakker I
VADEN Spare Parts for the Iveco Trakker I
The IVECO TRAKKER I is a heavy-duty on/off-road construction truck built for construction, mining and quarry work, offered as tipper, concrete mixer and chassis-cab in rigid (AD) and tractor (AT) configurations. VADEN offers 23 compatible product references for this model — find the right part by OEM number.
Products compatible with the Iveco Trakker I
This page is a live, filtered stock catalogue of VADEN products compatible with the IVECO TRAKKER I; as an independent aftermarket manufacturer, VADEN determines fitment by OEM number. Before ordering, confirm the match by comparing your vehicle's chassis or OEM number against the VADEN part codes.
Featured part groups
Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Filters, pumps and feed components for the fuel system.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →Iveco Trakker I generations
The table below summarizes the IVECO TRAKKER I's two main generations — but generation alone isn't enough for exact fitment, so always confirm compatibility using your vehicle's chassis or OEM number.
| Generation | Years | Engines |
|---|---|---|
| Trakker (Launch Series, Euro 3-Euro 5) | 2004-2013 | FPT Cursor 8 (7.8 L I6), FPT Cursor 13 (12.9 L I6) |
| Trakker Facelift (Restyled Cab, Euro 5/Euro 6) | 2013-2021 | FPT Cursor 9 (8.7 L I6), FPT Cursor 13 (12.9 L I6) |
Iveco Trakker I engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Are VADEN spare parts compatible with the IVECO TRAKKER I?
Yes. As an independent aftermarket manufacturer, VADEN offers 23 compatible product references for the IVECO TRAKKER I, covering the clutch, cooling system, fuel system and brake system groups. The IVECO and TRAKKER names are used solely to indicate compatibility; VADEN has no affiliation with these brands.
How do I choose the right part, and why does the OEM number matter?
Because the IVECO TRAKKER I was built with different chassis and equipment combinations even within the same generation, the most reliable method is to match your vehicle's OEM/part number against the reference number in the VADEN catalogue. Use the OEM number search or cross-reference list on the catalogue page to confirm the match.
Which engines and generations does the VADEN catalogue cover?
The catalogue lists parts compatible with the FPT Cursor 8 (7.8 L) and Cursor 13 (12.9 L) engines used in the 2004-2013 launch-series Trakker, as well as the Cursor 9 (8.7 L) and Cursor 13 (12.9 L) engines used in the 2013-2021 facelift series.
What part groups are available on this page?
The VADEN catalogue for the IVECO TRAKKER I lists 23 products across the clutch, cooling system, fuel system and brake system groups; open any product page for its specific compatibility details.
Can a part for one generation fit the other generation too?
Some components may be shared across the two generations, but cab, chassis and engine changes mean this isn't true for every part. Rather than assuming cross-generation fitment, always confirm compatibility using the OEM or chassis number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. Iveco, TRAKKER I and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
