VADEN Spare Parts for the Iveco Cursor 8 Engine
VADEN Spare Parts for the Iveco Cursor 8 Engine
VADEN's independent aftermarket parts program for the 7.8-litre inline-six Cursor 8 common-rail diesel that powers Iveco Stralis, EuroTech, EuroTrakker and Trakker heavy trucks, as well as Astra and Irisbus models. Match VADEN products across the clutch, cooling system, fuel system and brake system groups using OEM cross-references.
VADEN Parts Compatible with Cursor 8
The groups below cover the VADEN parts listed in our catalogue for this engine. To select the correct part, always confirm against your vehicle's OEM part number.
306.01.0044
Clutch Servo
306.01.0044.05
Repair Kit, Clutch Servo
306.01.0044.02
Repair Kit, Clutch Servo
306.01.0046.01
Repair Kit, Clutch Servo
306.01.0046.05
Repair Kit, Clutch Servo
306.01.0046.02
Repair Kit, Clutch Servo
306.01.0044.03
Repair Kit, Clutch Servo
306.01.0044.01
Repair Kit, Clutch Servo
306.01.0044.04
Repair Kit, Clutch Servo
306.01.0046.06
Repair Kit, Clutch Servo
306.01.0046.03
Repair Kit, Clutch Servo
306.01.0046.04
Repair Kit, Clutch Servo
306.01.0046
Clutch Servo
306.01.0048
Clutch Servo
306.01.0020
Clutch Servo
331.05.0011
Belt Tensioner, Fan
331.05.0007
Belt Tensioner, Fan
331.05.0005
Belt Tensioner, Fan
331.05.0002
Belt Tensioner, Fan
331.05.0001
Belt Tensioner, Fan
525.05.0004
0105 056, Water Pump
525.05.0001
0105 053, Water Pump
0101 163
Water Separator, Fuel Filter
0107 072
Water Separator, Fuel Filter
0105 070
Water Separator, Fuel Filter
301.04.0001
Cartridge, Air Dryer Valve
VADEN Part Groups for Cursor 8
Our catalogue lists 26 VADEN parts for this engine across 4 main groups. Each group is matched by cross-referencing the original part number.
VADEN clutch parts for the Iveco Cursor 8. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN cooling system parts for the Iveco Cursor 8. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN fuel system parts for the Iveco Cursor 8. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN brake system parts for the Iveco Cursor 8. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →Cursor 8 Engine Technical Data
The values below are for identifying the Iveco Cursor 8 engine. They are provided for engine identification and verification, not for part selection. For exact figures, the vehicle manufacturer's current service manual takes precedence.
| Specification | Value |
|---|---|
| Engine type | Inline-six, water-cooled 4-stroke direct-injection diesel; common-rail; turbocharger with charge-air intercooler |
| Displacement | 7.8 L (7,790 cm³) |
| Bore × stroke | approx. 104 × 152 mm |
| Compression ratio | approx. 17–18:1 (variant-dependent) |
| Power range | approx. 170–243 kW (230–330 hp), depending on variant |
| Maximum torque | approx. 850–1,300 Nm, depending on variant |
| Emission | Euro III – Euro V (variant-dependent) |
| Injection | Common-rail, electronic engine management |
| Launch year | early 2000s |
| Generations / build code | Cursor 8 (F2B) family |
Vehicles Using the Cursor 8 Engine
The Cursor 8 inline-six was used in the heavy commercial vehicles below. Exact usage is model-specific and should be verified by VIN.
First-generation heavy tractor and rigid truck range. One of the main Cursor 8 applications; mid-to-high power class.
Volvo CE A compatibility hub →Long-haul tractor. Earlier Iveco model fitted with the Cursor 8.
Renault Trucks C compatibility hub →Construction and heavy-duty truck. Common Cursor 8 application.
Volvo CE A compatibility hub →Construction and off-road heavy truck range. With mid-power Cursor 8 variants.
Volvo CE A compatibility hub →Heavy-duty vehicle (mining, construction). Iveco-based platform with the Cursor 8 engine.
Volvo CE A compatibility hub →Urban transit bus. Horizontal Cursor 8 application; usage should be confirmed by VIN.
Renault Trucks C compatibility hub →Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit with the original equipment. Every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number. This page groups compatible VADEN parts by engine identity.
Frequently Asked Questions
Are VADEN parts compatible with the Iveco Cursor 8 engine?
VADEN offers the parts listed on this page for vehicles powered by the Iveco Cursor 8. Exact fitment should always be confirmed by your vehicle's OEM part number.
Which VADEN product groups are available for the Cursor 8?
Our catalogue lists parts for the Cursor 8 across the clutch, cooling system, fuel system and brake system groups; 26 items in total. The largest group is clutch parts.
Which vehicles use the Iveco Cursor 8?
The Cursor 8 is found mainly in the Iveco Stralis, EuroTech MH, EuroTrakker and Trakker, as well as the Astra HD8 and Irisbus Citelis. The full list is model-specific; verify by VIN.
Is there a VADEN clutch part for the Cursor 8?
Yes. The clutch is the largest group in our catalogue for the Cursor 8 (15 items); related pressure plates, discs and release bearings are also listed. Confirm fitment by OEM number.
Are VADEN parts original (OEM)?
VADEN is an independent aftermarket manufacturer; parts are produced to OEM dimensions for a direct fit but are not OEM. Exact fitment must be confirmed by OEM part number.
VADEN is an independent heavy-vehicle spare-parts manufacturer and has no affiliation, partnership or authorized-dealer relationship with Iveco. Iveco, Cursor 8, Astra, Irisbus and related vehicle/engine names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by OEM part number.
