Scania Clutch Other Parts: OEM Number Cross Reference
Find the VADEN aftermarket equivalent of Scania clutch hoses, release forks, fork repair kits, pivot pins, release rings and mounting kits by the OEM number on your part.
These parts connect the clutch actuation system to the clutch itself: the hose is part of the actuation line, while the release fork, its pivot pin and the release ring pass on the movement that disengages the clutch. Find the Scania OEM number on your part in the left column and open the VADEN part next to it. Before ordering, check the OEM number and the technical data on the product page; the vehicle manufacturer's service documentation is decisive.
| Scania OEM number | VADEN part number |
|---|---|
| 1434228 | 306.04.0008 |
| 1434229 | 306.04.0010 |
| 1489861 | 306.04.0009 |
| 1535418 | 306.04.0006 |
| 1535419 | 306.04.0007 |
| 1535420 | 306.04.0005 |
| 1860195 | 306.04.0006 |
| 1860196 | 306.04.0007 |
| 1860197 | 306.04.0005 |
| 2398576 | 306.04.0005 |
| 2398577 | 306.04.0007 |
| 2398578 | 306.04.0006 |
| Scania OEM number | VADEN part number |
|---|---|
| 1479577 | 0104 238 |
| 1543645 | 0104 238 |
| 1545625 | 0104 238 |
| 1737306 | 0104 238 |
| 2086024 | 0104 275 |
| 2258072 | 0104 275 |
| Scania OEM number | VADEN part number |
|---|---|
| 383695 | 9000 01 051 |
| 388054 | 9000 01 055 |
| 1393187 | 9000 01 055 |
| Scania OEM number | VADEN part number |
|---|---|
| 1749126 | 9000 01 001 |
| 1805148 | 9000 01 003 |
| 2233597 | 9000 01 003 |
All VADEN parts in this category with photos and technical data.
Go to category →Signs of a failing clutch master or slave cylinder and how to diagnose the fault.
Read the guide →Scania models, engines and part groups covered by VADEN.
Scania parts →All Scania part groups with OEM number tables.
All Scania OEM pages →Look up the Scania OEM number on your old part in the left column of the table; the VADEN part number next to it links to the matching product page. Check the OEM number and the technical data there before ordering.
Check them whenever the clutch is serviced or replaced, and when the pedal feels uneven, the clutch does not disengage fully, or the hose shows cracks, leaks or chafing. Worn fork parts can be renewed with the matching repair or mounting kit; intervals and settings follow the vehicle manufacturer's service documentation.
No. VADEN parts are aftermarket replacement parts; the Scania name and OEM numbers are used only to show compatibility. The match is based on the catalogue, so check the OEM number and the technical data on the product page before ordering; the vehicle manufacturer's service documentation is decisive.