Scania Cab Tilting OEM Numbers and VADEN Equivalents

Scania Cab Tilting OEM Numbers and VADEN Equivalents

Scania Cab Tilting OEM Numbers and VADEN Equivalents

Find the VADEN cab tilting hose that matches your Scania OEM number. The table lists 52 Scania OEM numbers matched to 19 VADEN parts, each linked to its product page.

Scania Cab Tilting Hose: OEM to VADEN Cross Reference

The cab tilting system tips the cab forward so the engine and the parts beneath it can be reached; its hoses carry hydraulic fluid between the tilt pump and the tilt cylinder. Find the Scania OEM number on your hose in the left column; the right column shows the matching VADEN part number. Before ordering, check the OEM number and the technical data on the product page; the vehicle manufacturer's service documentation is the reference.

Related pages

Category: Cab Tilting

All VADEN parts in this category with photos and technical data.

Go to category →
Cab Tilt Pump

How the cab tilt pump works, common faults and what to check before replacing it.

Read the guide →
VADEN parts for Scania

Scania models, engines and part groups covered by VADEN.

Scania parts →
Scania OEM cross reference

All Scania part groups with OEM number tables.

All Scania OEM pages →

Other Scania OEM cross reference pages

Fan Water Pumps Brake System: other parts Engine: other parts Air Compressor Brake Caliper Repair Kits Exhaust Manifolds Air Brake Compressor Repair Kits Fuel System: other parts Flexible Pipe Retarder Clutch Servo Gearbox: other parts Pressure Limiting Valves Engine Oil Cooler Air Processing Units Steering Pumps Exhaust Brake Valves Relay Valves Air Dryer Valves Master Cylinders Brake Dust Cover Brake Cylinder Clutch: other parts ECAS Solenoid Valves Cabin Suspension Radiator Brake Caliper Carrier Suspension: other parts Fuel Filters Thermostats

Frequently asked questions

How do I find the VADEN part for my Scania cab tilting hose OEM number?

Look up the OEM number on your hose in the Scania OEM number column; the VADEN part number in the same row is the matched equivalent. Both numbers link to their product pages, where you can check the technical data before ordering.

When should a cab tilting hose be replaced?

Replace the hose if you see hydraulic fluid leaks, cracks, swelling or chafing on the outer cover. A cab that tilts slowly or does not hold its position can point to a leaking hose, but the pump, cylinder and fluid level should also be checked; follow the vehicle manufacturer's service documentation.

Are VADEN cab tilting hoses original Scania parts?

No. VADEN parts are aftermarket replacement parts, not original Scania parts; the Scania name and OEM numbers are shown only to indicate compatibility. Confirm the match with the OEM number and the product data, and treat the vehicle manufacturer's service documentation as the reference.

Top Scroller