Scania Brake Cylinder Hose: OEM to VADEN Cross Reference

Scania Brake Cylinder Hose: OEM to VADEN Cross Reference

Scania Brake Cylinder Hose: OEM to VADEN Cross Reference

Have the Scania OEM number from your brake cylinder hose? Look it up in the table below to find the equivalent VADEN part, then confirm the match on the product page before ordering.

Scania brake cylinder hose OEM numbers and VADEN equivalents

The brake cylinder hose carries compressed air from the brake line to the brake cylinder at the wheel and flexes as the axle and suspension move. Each row of the table pairs a Scania OEM number with its VADEN part number, and both link to the product pages. The match is based on our catalog, so check the OEM number and the technical data on the product page before you order.

Related pages

Category: Brake Cylinder

All VADEN parts in this category with photos and technical data.

Go to category →
Brake Chamber, Diaphragm & Hose

How brake chambers, diaphragms and hoses work, and how to spot wear and air leaks.

Read the guide →
VADEN parts for Scania

Scania models, engines and part groups covered by VADEN.

Scania parts →
Scania OEM cross reference

All Scania part groups with OEM number tables.

All Scania OEM pages →

Other Scania OEM cross reference pages

Fan Water Pumps Brake System: other parts Engine: other parts Air Compressor Brake Caliper Repair Kits Exhaust Manifolds Air Brake Compressor Repair Kits Fuel System: other parts Flexible Pipe Retarder Cab Tilting Clutch Servo Gearbox: other parts Pressure Limiting Valves Engine Oil Cooler Air Processing Units Steering Pumps Exhaust Brake Valves Relay Valves Air Dryer Valves Master Cylinders Brake Dust Cover Clutch: other parts ECAS Solenoid Valves Cabin Suspension Radiator Brake Caliper Carrier Suspension: other parts Fuel Filters Thermostats

Frequently asked questions

How do I find the VADEN part for a Scania brake cylinder hose OEM number?

Read the OEM number on your hose or in the Scania parts documentation and find it in the Scania OEM column of the table. The VADEN part number in the same row is the equivalent; open its product page to check the technical data.

When should a brake cylinder hose be replaced?

Replace it if it shows cracks, chafing, swelling or damaged fittings, or if you hear an air leak near the hose when the brakes are applied. Make sure the hose does not rub against the chassis; inspection and replacement intervals are set by the vehicle manufacturer's service documentation.

Are VADEN parts original Scania parts?

No. VADEN parts are aftermarket replacement parts, and the Scania name and OEM numbers are used only to show compatibility. Confirm the match by OEM number and the technical data on the product page before ordering; the vehicle manufacturer's service documentation is the reference for fitting.

Top Scroller