Scania Brake Dust Cover OEM Numbers and VADEN Equivalents

Scania Brake Dust Cover OEM Numbers and VADEN Equivalents

Scania Brake Dust Cover OEM Numbers and VADEN Equivalents

Find the VADEN aftermarket brake dust cover that matches the Scania OEM number on your part. The table lists 30 Scania OEM numbers matched to 15 VADEN parts.

Scania Brake Dust Cap OEM Numbers to VADEN Part Numbers

A brake dust cover helps protect the brake assembly from road dirt, water spray and stone chips, so the brake parts behind it stay cleaner. Find the Scania OEM number on your old part in the left column; the right column shows the matching VADEN part, and both numbers link to their product pages. Matches are based on our catalog, so check the OEM number and the technical data on the product page before you order.

Related pages

Category: Brake Dust Cover

All VADEN parts in this category with photos and technical data.

Go to category →
Brake Dust Shield

What a brake dust cover does, when to replace it and what to check during installation.

Read the guide →
VADEN parts for Scania

Scania models, engines and part groups covered by VADEN.

Scania parts →
Scania OEM cross reference

All Scania part groups with OEM number tables.

All Scania OEM pages →

Other Scania OEM cross reference pages

Fan Water Pumps Brake System: other parts Engine: other parts Air Compressor Brake Caliper Repair Kits Exhaust Manifolds Air Brake Compressor Repair Kits Fuel System: other parts Flexible Pipe Retarder Cab Tilting Clutch Servo Gearbox: other parts Pressure Limiting Valves Engine Oil Cooler Air Processing Units Steering Pumps Exhaust Brake Valves Relay Valves Air Dryer Valves Master Cylinders Brake Cylinder Clutch: other parts ECAS Solenoid Valves Cabin Suspension Radiator Brake Caliper Carrier Suspension: other parts Fuel Filters Thermostats

Frequently asked questions

How do I find the VADEN part for a Scania brake dust cover OEM number?

Find the Scania OEM number on your old dust cover or in the vehicle's parts documentation, then locate it in the left column of the table. The VADEN part number next to it links to the product page, where you can compare the technical data before ordering.

When should a brake dust cover be replaced?

Replace it when it is bent, cracked, corroded or rubbing against the disc or drum, or when it was damaged during brake work. A scraping noise from the wheel can mean a bent cover is touching the disc; follow the vehicle manufacturer's service documentation for inspection and installation.

Are VADEN brake dust covers original Scania parts?

No. VADEN parts are aftermarket replacement parts, not original Scania parts; the Scania name and OEM numbers are used only to show compatibility. Confirm fitment with the OEM number and treat the vehicle manufacturer's service documentation as the reference.

Top Scroller