VADEN Spare Parts for the MAN TGA
VADEN Spare Parts for the MAN TGA
The MAN TGA is MAN's heavy-duty, cab-over flagship truck built from 2000 to 2007 as the successor to the F2000, in tractor and heavy rigid form. Find 89+ VADEN references compatible with this model in seconds using your OEM number.
Products compatible with the MAN TGA
The list below shows current VADEN stock compatible with the MAN TGA as a live catalogue. Always confirm fitment with your OEM number.
Featured part groups
VADEN's core line: complete air brake compressors and repair/overhaul kits.
Go to category →Clutch servos and clutch-area components.
Go to category →Water pumps, thermostats and cooling-group components.
Go to category →Gaskets, pumps and ancillary components for the engine group.
Go to category →VADEN components for the gearbox / transmission group.
Go to category →Caliper mechanisms, chambers, valves, air dryer and APU group.
Go to category →MAN TGA generations
The MAN TGA splits into two engine phases, but generation alone is not enough for part selection — the OEM or chassis number is decisive.
| Generation | Years | Engines |
|---|---|---|
| TGA — Euro 3 phase (unit-pump engines) | 2000–2004 | D2866 (11.97 L inline-6), D2876 (12.8 L inline-6); D2840 V10 (18.27 L, up to 660 hp — 41.660 heavy-haulage tractor only, XXL cab) |
| TGA — common-rail phase (Euro 4/5, EDC7) | 2004–2007 | D2066 (10.5 L inline-6), D2676 (12.4 L inline-6), D2876 (12.8 L inline-6, top rating incl. 660 hp) |
MAN TGA engines
Explore compatible VADEN parts by the engine families fitted to this model. Engine identity must be verified by OEM/chassis number.
Why VADEN
VADEN parts are produced to OEM dimensions for a direct fit; every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number; this page groups compatible VADEN parts for the model.
Frequently Asked Questions
Do VADEN parts fit the MAN TGA?
Yes. VADEN manufactures independent aftermarket parts to OEM dimensions for the heavy commercial vehicle family including the MAN TGA; every product is listed with the OEM numbers it is compatible with.
I only have an OEM number — is that enough?
It is. Typing the OEM number into the product search lists the VADEN product compatible with the TGA; this is the most reliable way to select the correct part.
Which engines and phases does the MAN TGA come with?
The TGA was built in two phases: the 2000–2004 Euro 3 unit-pump D2866/D2876 (with the D2840 V10 in the 41.660 model only), and the 2004–2007 common-rail D2066, D2676 and D2876. VADEN compatibility covers the D2066, D2676 and D2876 engines.
Which part groups are available for the TGA?
You will find 89+ compatible VADEN references across the air brake compressors, clutch, cooling system, engine and transmission groups.
Will a part I bought for the Euro 3 phase fit a common-rail TGA?
Not always. The engine family (D2866→D2066/D2676) and some components change between the two phases; always verify the transition with the OEM number.
VADEN is an independent aftermarket manufacturer of heavy-vehicle spare parts. MAN, TGA and related names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by the OEM part number.
