LP1332 S1 Cylinder Head for Knorr-Bremse compressors
20 09 50
Summary
This compressor cylinder head is a high-strength component designed for heavy commercial vehicle air brake systems. It is compatible with Knorr-Bremse systems, providing a precise seal for the compression chamber to ensure stable air output and thermal regulation during operation. Equivalent to OE Knorr-Bremse LP1332S1.
| EAN Code | 8699031041827 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
-
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
Description
What does a cylinder head do?
This cylinder head acts as the critical service component that sits atop the air brake compressor's cylinder block, sealing the compression chamber from above. By replacing only this component, workshop technicians can effectively rebuild a compressor in place, avoiding the need for a complete unit replacement. It serves as the primary interface for internal air passages and valve seating.Compatible vehicle systems
This part is designed to be compatible with Knorr-Bremse systems used in heavy commercial vehicle applications. Whether utilized in single-cylinder or twin-cylinder architectures, it ensures the necessary pressure and temperature management required for reliable pneumatic braking performance.Installation and maintenance
When performing maintenance, technicians should verify the specific architecture of the existing unit, noting whether it requires an air-cooled or water-cooled configuration. Proper installation ensures that the inlet and discharge valve seats maintain a perfect seal against the cylinder block to prevent pressure drops.Troubleshooting and selection
Consult your authorized distributor to ensure correct fitment for your specific compressor model.OE cross-reference
20 09 50 (Compressor Cylinder Head) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number LP1332S1.Other OEMs
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DEUTZ | |||
| KNORR-BREMSE |
FAQ
What is the function of a compressor cylinder head?
It seals the compression chamber from above and houses the seats for the inlet and discharge valves, directly governing air output and temperature.
Can this part be used to rebuild an existing compressor?
Yes, this component allows workshop technicians to rebuild a compressor in place rather than replacing the entire unit.
What should I check before installation?
Technicians should verify if the unit requires an air-cooled or water-cooled design and ensure it matches the existing cylinder block architecture.
Does this part fit all air brake compressors?
The part is specifically designed to be compatible with Knorr-Bremse systems; always check compatibility with your specific compressor model.
What are the OE reference numbers of this part?
20 09 50 directly replaces Knorr-Bremse OE number LP1332S1.