LK1504 S1 Knorr-Bremse Compatible Compressor Cylinder Head
20 09 50
Summary
This compressor cylinder head is a high-strength component designed for air brake compressor rebuilds. It is compatible with Knorr-Bremse systems and serves as the critical seal for the compression chamber, ensuring stable air output and thermal management in heavy commercial vehicle braking systems. Equivalent to OE Knorr-Bremse LK1504S1.
| EAN Code | 8699031041827 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
-
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
Description
What does a compressor cylinder head do?
A compressor cylinder head is the cast service component that sits on top of an air brake compressor's cylinder block and seals the compression chamber from above. This part is essential for workshop technicians looking to rebuild a compressor in place rather than replacing the entire unit. It acts as the primary seal for the compression chamber, directly influencing both air output and operational temperature.Compatibility and system function
This component is designed to be compatible with Knorr-Bremse systems. It functions effectively within the heavy commercial vehicle braking architecture, providing the necessary seating for inlet and discharge valves while managing internal air passages. The design ensures reliable performance under the high-pressure demands of commercial air brake systems.Installation and maintenance guidance
When performing installation or maintenance, ensure all mating surfaces are clean and inspect valve seats for any debris. Proper torque application is critical to maintain a seal between the head and the cylinder block. For optimal service life, verify that the unloader port and cooling cavities are free from obstructions during assembly.Selection and service guidance
Consult your authorized distributor to ensure this part meets the specific architecture of your compressor, whether it be single-cylinder, twin-cylinder, or water-cooled configurations.OE cross-reference
20 09 50 (Compressor Cylinder Head) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number LK1504S1.Other OEMs
DEUTZ
- 01179230 S1
- 01178041 S1
- 01175309 S1
- 01173877 S1
- 01173876 S1
- 01173875 S1
- 01173873 S1
- 01173871 S1
- 01173870 S1
- 01173868 S1
- 01173863 S1
- 01173305 S1
- 01172908 S1
KNORR-BREMSE
- LP1332 S1
- LP1327 S1
- LK1549 S1
- LK1534 S1
- LK1524 S1
- LK1504 S1
- LK1503 S1
- LK1500 S1
- LK1314 S1
- LK1309 S1
- LK1304 S1
- LK1303 S1
- LK1302 S1
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DEUTZ | |||
| KNORR-BREMSE |
FAQ
What is the function of a compressor cylinder head?
The cylinder head sits atop the compressor block to seal the compression chamber and houses the inlet and discharge valve seats, governing air output.
Can this part be used to rebuild an existing compressor?
Yes, this component allows a workshop technician to rebuild a compressor in place by replacing only the top cover instead of the entire unit.
Is this part compatible with Knorr-Bremse systems?
This cylinder head is designed to be compatible with Knorr-Bremse systems used in heavy commercial vehicle air brake architectures.
What should be checked during installation?
Technicians should check that all mating surfaces are clean and verify that cooling cavities and unloader ports are free from obstructions.
What are the OE reference numbers of this part?
20 09 50 directly replaces Knorr-Bremse OE number LK1504S1.