What Is a Rocker Arm Repair Kit?

A rocker arm repair kit is a set for renewing the worn components of the rocker arm mechanism, which passes the motion of the camshaft on to the valves in heavy-duty diesel engines. Because the rocker arm swings constantly on its shaft, its contact surfaces, bearing and connecting parts wear over time. The repair kit lets you renew these worn parts without replacing the whole arm, which restores accurate, play-free valve motion.

When Is It Needed? Signs of Failure
  • Valve Tapping: A metallic tapping from the cylinder head side that speeds up with engine revs shows that play has developed in the rocker mechanism.
  • Valve Lash That Keeps Drifting: If valve clearance opens up again soon after adjustment, it points to worn components.
  • Power Loss and Rough Idle: When the valves do not open and close fully, cylinder filling suffers; the engine misfires and pulling power drops.
Repair Kit or Complete Replacement?
  • When the Kit Is Enough: If the arm body and shaft are sound and wear is limited to the components the kit covers, the repair kit is the more economical and faster solution.
  • When Complete Replacement Is Needed: If the body is cracked, bent or broken, or the shaft bore is deeply worn, the rocker arm must be replaced as a whole.
Installation and Points to Watch
  • Cleanliness: Before assembly, the shaft, oil passages and contact surfaces should be cleaned and the oil holes must be open.
  • Initial Lubrication: Moving surfaces should be coated with engine oil during assembly so that they do not run dry at the first start-up.
  • Tightening Torque: Fastening bolts should be tightened to the torque value and in the sequence specified by the manufacturer; values vary by engine type.
  • Valve Lash Adjustment: After assembly, valve lash should be checked and adjusted with the engine cold, and the alignment with the camshaft verified.

Important: For torque, valve clearance and adjustment sequence, the vehicle manufacturer's current service manual is authoritative.

VADEN Product: 0103 356

This category includes the 0103 356 Rocker Arm Repair Kit. According to the product page it is an equivalent of Volvo OE number 21792303 and Renault Trucks OE number 7421792303. The compatibility list covers Volvo FH, FM, FMX, B11R/B13R and VNL (D10-D16 engines), Renault Trucks Kerax, Magnum and Premium (DXi11-DXi13), and Mack Granite and Pinnacle (MP7, MP8). Before ordering, compare your engine type against this list.

Frequently Asked Questions (FAQ)
What is a rocker arm repair kit used for?

It renews the worn components of the rocker arm mechanism, so the motion coming from the camshaft is again passed on to the valves accurately and without play.

Which engines is the repair kit suitable for?

According to the compatibility list on the VADEN 0103 356 product page, it is used in Volvo D10, D11, D12, D13 and D16 series engines, Renault Trucks DXi11, DXi12 and DXi13, and Mack MP7 and MP8 engines.

Which OE numbers is 0103 356 equivalent to?

As stated on the product page, it is an equivalent of Volvo OE number 21792303 and Renault Trucks OE number 7421792303.

Should I use a repair kit or a complete rocker arm?

If the arm body, shaft bore and contact surfaces are sound and wear is limited to the components the kit covers, the repair kit is enough. If the body is cracked or bent, or wear is deep, the complete rocker arm should be replaced.

Is a valve lash adjustment needed after the kit is replaced?

Yes. Valve lash should be checked and adjusted after assembly. Adjustment values vary by engine type; the vehicle manufacturer's current service manual is authoritative.

Parent category: Rocker Swing Arms · Rocker Swing Arm (complete arm)

Works with: Cylinder Head · Piston & Liner · Engine (view all)

Related technical guide: Rocker Arm & Shaft Set: Faults, Replacement and Maintenance

Top Scroller