VADEN Spare Parts for the Scania DC9 Engine
VADEN's independent aftermarket parts program for the 9.3-litre inline-five DC9 diesel that powers the Scania 4-series, P-series, G-series and K-series heavy commercial vehicles as well as OmniLink buses. Match VADEN products across the cooling system, engine, clutch and brake system groups using OEM cross-references.
The groups below cover the VADEN parts listed in our catalogue for this engine. To select the correct part, always confirm against your vehicle's OEM part number.
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
Belt Tensioner, Fan
0104 074, Water Pump
0104 073, Water Pump
0104 075, Water Pump
0104 070, Water Pump
0104 077, Water Pump
Repair Kit, Exhaust Brake Valve
Repair Kit, Exhaust Brake Valve
Repair Kit, Exhaust Brake Valve
Repair Kit, Exhaust Brake Valve
Repair Kit, Exhaust Brake Valve
Repair Kit, Exhaust Brake Valve
(3+1), Exhaust Brake Valve
(2+0), Exhaust Brake Valve
(2+1), Exhaust Brake Valve
Repair Kit, Clutch Servo
Repair Kit, Clutch Servo
Repair Kit, Master Cylinder
Clutch Servo
Master Cylinder
Cartridge, Air Dryer Valve
Cartridge, Air Dryer Valve
Cartridge, Air Dryer Valve
Our catalogue lists 27 VADEN parts for this engine across 4 main groups. Each group is matched by cross-referencing the original part number.
VADEN cooling system parts for the Scania DC9. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN engine parts for the Scania DC9. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN clutch parts for the Scania DC9. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →VADEN brake system parts for the Scania DC9. Items are matched by OEM number; confirm fitment against your vehicle reference.
Go to category →The values below are for identifying the Scania DC9 engine. They are provided for engine identification and verification, not for part selection. For exact figures, the vehicle manufacturer's current service manual takes precedence.
| Specification | Value |
|---|---|
| Engine type | Inline-five, water-cooled 4-stroke direct-injection diesel; turbocharged with charge-air intercooler |
| Displacement | approx. 9.3 L (approx. 9,310 cm³) |
| Bore × stroke | approx. 130 × 140 mm (variant-dependent) |
| Compression ratio | approx. 17–18:1 (variant-dependent) |
| Power range | approx. 169–228 kW (230–310 hp), depending on variant |
| Maximum torque | approx. 1,200–1,550 Nm, depending on variant |
| Emission | Euro 2 – Euro 5 (variant-dependent; early generations uncatalyzed, later generations with SCR/EGR) |
| Injection | Unit injector (PDE) system on early variants, electronic engine management on later variants |
| Launch year | around 1996 (introduced with the Scania 4-series) |
| Generations / build code | Numerous sub-variants from DC9 01 to DC9 32, differing by emission level and power rating |
The DC9 inline-five was used in the heavy commercial vehicles and buses below. Exact usage is model-specific and should be verified by VIN.
The medium-heavy tractor/truck series in which the DC9 was introduced. Main platform for the 9-litre variants such as P94 and G94.
Volvo CE A compatibility hub →First-generation P-series, focused on distribution and urban duty. Fitted with DC9 variants for medium-duty applications.
Volvo CE A compatibility hub →First-generation K-series bus chassis. DC9 variants in horizontal or vertical mounting were used in coaches and city buses.
Volvo CE A compatibility hub →First-generation G-series medium-heavy tractor. Used the DC9 for distribution and regional haulage.
Volvo CE A compatibility hub →Second-generation G-series truck. Updated DC9 variants meeting higher emission standards.
Volvo CE A compatibility hub →Urban and suburban public-transport bus. Horizontally mounted DC9 engine for the low-floor bus application.
Volvo CE A compatibility hub →VADEN parts are produced to OEM dimensions for a direct fit with the original equipment. Every product is listed with its matching OEM numbers.
VADEN exports heavy-vehicle aftermarket parts to 100+ countries, with a deep range in the air-brake compressor line.
The correct part is always confirmed by OEM/chassis number. This page groups compatible VADEN parts by engine identity.
VADEN offers the parts listed on this page for vehicles powered by the Scania DC9. Exact fitment should always be confirmed by your vehicle's OEM part number.
Our catalogue lists parts for the DC9 across the cooling system, engine, clutch and brake system groups; 27 items in total. The largest group is cooling system parts.
The DC9 is found mainly in the Scania 4-series, P-series (Gen I), G-series (Gen I and II), K-series (Gen I) and OmniLink buses. The full list is model-specific; verify by VIN.
Yes. Cooling system is the largest group in our catalogue for the DC9 (10 items); water pumps, thermostats and related gaskets are also listed. Confirm fitment by OEM number.
VADEN is an independent aftermarket manufacturer; parts are produced to OEM dimensions for a direct fit but are not OEM. Exact fitment must be confirmed by OEM part number.
VADEN is an independent heavy-vehicle spare-parts manufacturer and has no affiliation, partnership or authorized-dealer relationship with Scania. Scania, DC9 and related vehicle/engine names are trademarks of their respective owners, used on this page solely to indicate compatibility. VADEN parts are not original equipment (OEM); exact fitment must be confirmed by OEM part number.