Skip to content
777 Views Updated

412 353 659 4 Cylinder Head compatible with WABCO

13 02 51

Summary

This high-strength compressor cylinder head is designed for heavy commercial vehicle air brake systems. It is compatible with WABCO systems and serves as a critical component for rebuilding air brake compressors to ensure reliable air output and thermal stability under high load. Equivalent to OE WABCO 4123536594.

Product identifiers
EAN Code8699031021515
Ready to Order
Get Information

Compatible OEM Codes

  • WABCO
    • 412 353 659 4

Description

What does a compressor cylinder head do?

This cylinder head acts as the essential cast component that sits atop the air brake compressor cylinder block, sealing the compression chamber from above. It is a vital part for workshop technicians looking to rebuild a compressor in place rather than replacing the entire unit. This component directly governs both the compressor's air output and its operating temperature through internal air passages and valve seats.

Compatibility and application

The part is compatible with WABCO systems and is designed to meet the rigorous demands of heavy commercial vehicle braking systems. By replacing only the cylinder head, fleet managers can achieve efficient maintenance cycles for their air brake compressors. This part is also used in various heavy-duty applications where reliable pneumatic pressure is required.

Installation and maintenance

When performing installation, technicians should ensure the cylinder block surface is clean and inspect the valve seats for any debris. Proper torque application during mounting is critical to maintain a seal and prevent pressure loss. Always verify that the port configuration matches the existing compressor assembly to ensure correct governor signal reception.

Troubleshooting guidance

Selecting the correct cylinder head is crucial for maintaining system pressure. If you encounter issues with low air output or overheating, inspecting this component is a recommended troubleshooting step.

OE cross-reference

13 02 51 (Compressor Cylinder Head) is the equivalent of the WABCO OE number. This part directly replaces WABCO OE number 4123536594.

Other OEMs

WABCO

  • 4123536594
  • 412.353.659.4
  • 412 353 659 4

Related Products

Compatible Vehicles

Compatible Vehicles
BrandModelModel TypeEngine
RENAULT TRUCKS Magnum DXi12
VOLVO
VOLVO FH 400
VOLVO FH 420
VOLVO FH 440
VOLVO FH 460
VOLVO FH 480
VOLVO FH 500
VOLVO FH 520
VOLVO FH 540
VOLVO FH II 420
VOLVO FH II 460
VOLVO FH II 500
VOLVO FH II 540
VOLVO FH12 D12C
VOLVO FH12 D12D
VOLVO FH16 D16C
VOLVO FM FM 300
VOLVO FM FM 330
VOLVO FM FM 340
VOLVO FM FM 360
VOLVO FM FM 370
VOLVO FM FM 380
VOLVO FM FM 390
VOLVO FM FM 400
VOLVO FM FM 410
VOLVO FM FM 420
VOLVO FM FM 430
VOLVO FM FM 440
VOLVO FM FM 450
VOLVO FM FM 460
VOLVO FM FM 480
VOLVO FM FM 500
VOLVO FM II FM 330
VOLVO FM II FM 370
VOLVO FM II FM 380
VOLVO FM II FM 410
VOLVO FM II FM 420
VOLVO FM II FM 450
VOLVO FM II FM 460
VOLVO FM II FM 500
VOLVO FM10 D10A
VOLVO FM12 D12C
VOLVO FM12 D12D
VOLVO FM9 FM 9/260
VOLVO FM9 FM 9/300
VOLVO FM9 FM 9/340
VOLVO FM9 FM 9/380
VOLVO NH12 D12C
VOLVO VHD D12
VOLVO VNL D12
WABCO

Vehicle and Engine Pages

FAQ

What is the function of a compressor cylinder head?
The cylinder head seals the compression chamber and houses the inlet and discharge valve seats, directly influencing air output and temperature.
Can this part be used to rebuild an existing compressor?
Yes, this component allows workshop technicians to rebuild a compressor in place, offering a more efficient alternative to full unit replacement.
What should be checked during installation?
Technicians should verify port sizes, ensure clean mating surfaces, and check that valve seats are correctly aligned to prevent pressure leaks.
Is this component compatible with WABCO systems?
Yes, this cylinder head is designed to be compatible with WABCO systems used in heavy commercial vehicles.
What are the OE reference numbers of this part?
13 02 51 directly replaces WABCO OE number 4123536594.