3090378 Volvo Compatible Compressor Cylinder Head
13 06 10
Summary
This high-strength compressor cylinder head is designed for heavy commercial vehicle air brake systems. It is compatible with Volvo F12, FL, and FH12 series engines, including TD122 and D12A configurations, ensuring reliable air compression for heavy-duty operations. Equivalent to OE Volvo 3090378.
| EAN Code | 8699031021652 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- SEB01080004
- K070846K57
-
VOLVO
- 3090378
Description
This compressor cylinder head is the cast service part that closes off the top of an air brake compressor's cylinder block and carries the seats for the inlet and discharge valves. It holds the piston's compressed air without leaking, routes it out through the discharge port, and carries away part of the compression heat from the body. It is used on single- and twin-cylinder, air-cooled or water-cooled compressors fitted to trucks, tractor units, buses, trailers and heavy equipment.
This component is specifically engineered to fit a wide range of Volvo vehicles, including the F12 (TD122), FL series (D10A/TD102), FH12 (D12A), and NH12 models. It also serves various configurations in the FL6, FL7, B10, and F16 series. These parts allow for efficient rebuilding of existing compressor units in heavy commercial vehicle applications.
When performing maintenance or repairs, technicians should verify the compressor architecture to ensure correct fitment. This part is designed to withstand high-pressure cycles within the pneumatic system. For optimal performance, inspect the valve seats and gasket surfaces during installation to prevent pressure loss.
Consult your authorized distributor for precise application details.
This component is specifically engineered to fit a wide range of Volvo vehicles, including the F12 (TD122), FL series (D10A/TD102), FH12 (D12A), and NH12 models. It also serves various configurations in the FL6, FL7, B10, and F16 series. These parts allow for efficient rebuilding of existing compressor units in heavy commercial vehicle applications.
When performing maintenance or repairs, technicians should verify the compressor architecture to ensure correct fitment. This part is designed to withstand high-pressure cycles within the pneumatic system. For optimal performance, inspect the valve seats and gasket surfaces during installation to prevent pressure loss.
Consult your authorized distributor for precise application details.
OE cross-reference
13 06 10 (Compressor Cylinder Head) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 3090378.Other OEMs
KNORR-BREMSE
- SEB01080004
- K070846K57
VOLVO
- 3090378
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| KNORR-BREMSE | |||
| VOLVO | |||
| VOLVO | B10 | B10 | |
| VOLVO | B10B | D10A | |
| VOLVO | B10M | D10A | |
| VOLVO | B12 | D12A | |
| VOLVO | F10 | TD102 | |
| VOLVO | F10 | F 10/320 | |
| VOLVO | F12 | TD122 | |
| VOLVO | F12 | F 12/320 | |
| VOLVO | F12 | F 12/330 | |
| VOLVO | F12 | F 12/360 | |
| VOLVO | F12 | F 12/370 | |
| VOLVO | F12 | F 12/400 | |
| VOLVO | F12 | F 12/410 | |
| VOLVO | F16 | F 16/470 | |
| VOLVO | F16 | F 16/485 | |
| VOLVO | F16 | F 16/500 | |
| VOLVO | FH12 | D12A | |
| VOLVO | FL | 5 | |
| VOLVO | FL | FL 180-11 | |
| VOLVO | FL | FL 180-12 | |
| VOLVO | FL | FL 180-13 | |
| VOLVO | FL | FL 180-14 | |
| VOLVO | FL | FL 180-15 | |
| VOLVO | FL | FL 180-17 | |
| VOLVO | FL | FL 180-18 | |
| VOLVO | FL | FL 180-7 | |
| VOLVO | FL | FL 220-10 | |
| VOLVO | FL | FL 220-11 | |
| VOLVO | FL | FL 220-12 | |
| VOLVO | FL | FL 220-13 | |
| VOLVO | FL | FL 220-14 | |
| VOLVO | FL | FL 220-15 | |
| VOLVO | FL | FL 220-16 | |
| VOLVO | FL | FL 220-17 | |
| VOLVO | FL | FL 220-18 | |
| VOLVO | FL | FL 220-7 | |
| VOLVO | FL | FL 220-8 | |
| VOLVO | FL | FL 220-9 | |
| VOLVO | FL | FL 250-10 | |
| VOLVO | FL | FL 250-11 | |
| VOLVO | FL | FL 250-12 | |
| VOLVO | FL | FL 250-13 | |
| VOLVO | FL | FL 250-14 | |
| VOLVO | FL | FL 250-15 | |
| VOLVO | FL | FL 250-16 | |
| VOLVO | FL | FL 250-17 | |
| VOLVO | FL | FL 250-18 | |
| VOLVO | FL | FL 250-7 | |
| VOLVO | FL | FL 250-8 | |
| VOLVO | FL | FL 250-9 | |
| VOLVO | FL10 | D10A | |
| VOLVO | FL10 | TD102 | |
| VOLVO | FL10 | TD103 | |
| VOLVO | FL10 | FL 10/280 | |
| VOLVO | FL10 | FL 10/285 | |
| VOLVO | FL10 | FL 10/310 | |
| VOLVO | FL10 | FL 10/320 | |
| VOLVO | FL10 | FL 10/350 | |
| VOLVO | FL10 | FL 10/360 | |
| VOLVO | FL10 | FL 10H/320 | |
| VOLVO | FL10 | FL 10H/360 | |
| VOLVO | FL12 | TD122 | |
| VOLVO | FL12 | TD123 | |
| VOLVO | FL6 | FL 608 | |
| VOLVO | FL6 | FL 609 | |
| VOLVO | FL6 | FL 610 | |
| VOLVO | FL6 | FL 611 | |
| VOLVO | FL6 | FL 612 | |
| VOLVO | FL6 | FL 613 | |
| VOLVO | FL6 | FL 614 | |
| VOLVO | FL6 | FL 615 | |
| VOLVO | FL6 | FL 616 | |
| VOLVO | FL6 | FL 617 | |
| VOLVO | FL6 | FL 618 | |
| VOLVO | FL6 | FL 619 | |
| VOLVO | FL6 | FL 621 | |
| VOLVO | FL6 | FL 626 | |
| VOLVO | FL7 | FL 7/230 | |
| VOLVO | FL7 | FL 7/245 | |
| VOLVO | FL7 | FL 7/260 | |
| VOLVO | FL7 | FL 7/285 | |
| VOLVO | FL7 | FL 7/290 | |
| VOLVO | NH12 | D12A | |
| VOLVO | NL10 | D10A | |
| VOLVO | NL12 | D12A |
Vehicle and Engine Pages
FAQ
What is the function of a compressor cylinder head?
It seals the top of the compressor cylinder block and provides seats for the inlet and discharge valves to manage air flow.
Which Volvo models is this compatible with?
It fits various Volvo series including F12, FL, FH12, NH12, NL10, and B10/B12 models depending on engine type.
Can this part be used to rebuild a compressor?
Yes, this component allows a technician to rebuild an existing air brake compressor in place instead of replacing the entire unit.
How do I know if my cylinder head needs replacement?
Look for signs of pressure loss in the pneumatic system or visible wear on the valve seat surfaces during inspection.
What are the OE reference numbers of this part?
13 06 10 directly replaces Volvo OE number 3090378.