T157191 S2 Ford Trucks compatible Clutch Servo Kit
306.01.0078.03
Summary
This clutch servo repair kit is designed for Ford Trucks heavy commercial vehicles, specifically for the Cargo series. It provides an economical solution to restore hydraulic actuation in the clutch system, ensuring smooth gear shifting and reliable engagement for fleet operators and workshop technicians. Equivalent to OE Ford Trucks T157191S2.
| EAN Code | 8699031095370 |
|---|
Ready to Order
Compatible OEM Codes
-
FORD
- T157191 S2
- 5C46 7K626 AB S2
-
WABCO
- APGA/1065/P S2
Description
What is a clutch servo repair kit?
A clutch servo repair kit is a service set that brings together the essential wear components—such as seals, O-rings, and dust boots—of the slave cylinder used in a heavy commercial vehicle's clutch hydraulic circuit. The clutch servo converts hydraulic pressure into mechanical motion to actuate the clutch, making it a critical component for gear shifting reliability.Compatible Ford Trucks models and engines
This specific kit is compatible with various Ford Trucks models, including the Cargo 3536, 3532, 3236, and 2536, across multiple engine configurations such as the Ecotorq 7.3 and 9.0 series. It is also suitable for Ford Trucks Cargo 1824, 1830, 1832, 1835, 1838T, 2524, 2526, 2530, 2532, 2535, 2536, 2538, 3230, 3232, 3235, 3236, and 3238 models.Installation and maintenance guidance
For professional technicians performing maintenance, it is vital to inspect the cylinder bore before installation. If the inner surface shows scoring or corrosion, a complete cylinder replacement may be necessary to prevent premature seal failure. When installing the new seals, ensure they are lubricated only with the correct grade of hydraulic fluid to prevent rubber degradation.Troubleshooting and selection tips
Proper maintenance of the clutch actuation system helps prevent spongy pedal feel and ensures consistent disengagement. To ensure a successful repair, always verify that the seal lip orientation is correct and that the circuit is completely bled of air after assembly.OE cross-reference
306.01.0078.03 (Clutch Servo Repair Kit) is the equivalent of the Ford Trucks OE number. This part directly replaces Ford Trucks OE number T157191S2.Other OEMs
FORD
- T157191 S2
- 5C46 7K626 AB S2
WABCO
- APGA/1065/PS2
- APGA/1065/P S2
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| FORD | |||
| FORD | Ecotorq 7.3 (Euro 3) | ||
| FORD | Ecotorq 7.3 (Euro 5) | ||
| FORD | Ecotorq 7.3 / 9.0 (Euro 5) | ||
| FORD | Ecotorq 9.0 (Euro 5) | ||
| FORD | Cargo 1824 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 1826 | Ecotorq 7.3 (Euro 5) | |
| FORD | Cargo 1830 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 1832 | Ecotorq 7.3 / 9.0 (Euro 5) | |
| FORD | Cargo 1835 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 1838T | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 2524 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 2526 | Ecotorq 7.3 (Euro 5) | |
| FORD | Cargo 2530 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 2532 | Ecotorq 7.3 / 9.0 (Euro 5) | |
| FORD | Cargo 2535 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 2536 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 2538 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 3230 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 3232 | Ecotorq 7.3 / 9.0 (Euro 5) | |
| FORD | Cargo 3235 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 3236 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 3238 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 3530 | Ecotorq 7.3 (Euro 3) | |
| FORD | Cargo 3532 | Ecotorq 7.3 / 9.0 (Euro 5) | |
| FORD | Cargo 3536 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 3936 | Ecotorq 9.0 (Euro 5) | |
| FORD | Cargo 4136 | Ecotorq 9.0 (Euro 5) | |
| WABCO |
Vehicle and Engine Pages
FAQ
How can I know if I need a repair kit or a complete servo?
If the leak is only from the seal and the cylinder bore is smooth without scoring or corrosion, a repair kit is sufficient. If the bore is damaged or the piston is seized, replace the whole unit.
Which Ford Trucks models are compatible with this kit?
This kit fits various Ford Trucks Cargo models including the 1824, 2530, 3236, and others equipped with Ecotorq 7.3 or 9.0 engines.
What should I check regarding seal installation?
The sealing lip must always face the pressure side of the cylinder. Incorrect orientation will cause immediate loss of hydraulic pressure.
Why is my clutch pedal feeling spongy after repair?
A spongy pedal is typically caused by trapped air in the hydraulic circuit. The system must be bled completely according to manufacturer specifications.
What are the OE reference numbers of this part?
306.01.0078.03 directly replaces Ford Trucks OE number T157191S2.