MCK1172 Compatible with Meritor DX 225 Pin Dust Boot
| Caliper |
|
|---|---|
| MERITOR |
|
| EAN Code | 8683457035843 |
Ready to Order
Summary
This brake caliper pin dust boot is designed for Meritor DX 225 systems. It acts as a flexible seal to protect guide pins from road salt, water, and dust, ensuring smooth caliper movement. An essential component for air disc brake maintenance on heavy commercial vehicles. Equivalent to OE Meritor MCK1172.
What's in this kit
-
4104024 Brake Caliper Cover Bolt M8 x 1.25 / 20 mm
-
4104022 Brake Caliper Cover Plate M12 x 1.75 / 20 mm
-
4104023 Brake Caliper Cover Plate M12 x 1.75 / 30 mm
-
4101018 Brake Caliper Pin Ø 35 / 98 mm
-
4101019 Brake Caliper Pin Ø 35 / 98 mm
-
4104019 Brake Caliper Pin Bolt M18 x 2.5 / 90 mm
-
4104020 Brake Caliper Pin Bolt M18 x 2.5 / 55 mm
-
4105014 Brake Caliper Pin Bushing Ø 35 x 39 / 50 mm
-
4115022 Brake Caliper Pin Cover Ø 42 / 31 mm
-
4104021 Brake Caliper Tappet Bolt M10 x 1.5 / 20 mm
-
4123008 Brake Caliper Cover Gasket
-
4104025 Brake Caliper Cover Plate
-
4120001 Brake Caliper Cover Plate
-
4102017 Brake Caliper Pin Dust Boot
-
4102018 Brake Caliper Tappet Dust Boot
-
4102019 Brake Caliper Tappet Seal
-
3524003 Grease 7 gr
-
4115023 Pad Holder Repair Kit
-
4115024 Pad Holder Repair Kit
Kits that include this kit 2
Compatible OEM Codes
-
MERITOR
- MCK1172
-
BREDAMENARINIBUS
- 193101
Description
What does a pin dust boot do?
This brake caliper pin dust boot serves as a critical sealing element within the air disc brake system. By forming a flexible barrier, it protects the caliper guide pins from harmful environmental contaminants such as water, mud, and road salt. Maintaining this seal is vital for ensuring that the caliper pins move freely during every brake application, preventing sticking or uneven wear.Vehicle and system compatibility
This component is specifically compatible with Meritor DX 225 models. It ensures the integrity of the caliper mechanism by keeping essential lubrication inside the pin bore while keeping abrasive debris out. This part is an equivalent to the original component required for maintaining heavy-duty braking performance.Maintenance and installation guidance
For optimal braking performance, technicians should inspect these boots during routine brake inspections. A damaged or cracked boot can lead to pin seizure and uneven pad wear. It is highly recommended to replace these seals whenever the caliper pins are serviced or when a complete repair kit is installed.Troubleshooting and service tips
Regular maintenance of the guide pin assembly helps prevent more costly caliper repairs by maintaining smooth axial movement of the floating caliper.OE cross-reference
4151033 (Brake Caliper Pin Dust Boot) is the equivalent of the Meritor OE number. This part directly replaces Meritor OE number MCK1172.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| BREDAMENARINIBUS |
Other OEMs
BREDAMENARINIBUS
- 193101
MERITOR
- MCK1172
FAQ
What is the function of a caliper pin dust boot?
The boot acts as a flexible seal that protects the guide pins from water, salt, and debris, ensuring they remain lubricated and move freely.
Which systems is this part compatible with?
This specific part is designed to be an equivalent for use in Meritor DX 225 air disc brake systems.
When should I replace the dust boot?
It is recommended to replace the boot during any service involving the caliper pins or when performing a full caliper repair kit installation.
What happens if the dust boot is damaged?
A damaged boot allows contaminants into the pin bore, which can cause the pins to seize and lead to uneven brake pad wear.
What are the OE reference numbers of this part?
4151033 directly replaces Meritor OE number MCK1172.