1677356 Volvo Compatible Valve Adjusting Shim
1300 05 028
Summary
This 3.35 mm valve adjusting shim is engineered for high-strength performance in Volvo heavy commercial vehicle engines. Designed to maintain precise valve clearance in Volvo D12, D16, and D10 engine series, this component ensures optimal combustion and engine timing. Check the compatibility list. Equivalent to OE Volvo 1677356.
| EAN Code | 8699031053479 |
|---|
Ready to Order
Compatible OEM Codes
-
VOLVO
- 1677356
Description
What is a valve adjusting shim?
A valve adjusting shim is a precision-ground steel spacer that brings valve clearance in heavy commercial vehicle diesel engines to the tolerance set by the manufacturer. It is fitted between the rocker arm, valve bridge, or cam follower and the valve, adding measured thickness into the chain between cam profile and valve so the valve seats fully on every cycle.Engine compatibility and fitment
This 3.35 mm shim is designed for use in various Volvo engines, including the D12C, D12D, D16C, D10A, and D12 series found in FH12, FM12, VNL, FH16, NH12, FM10, and VHD models. Using the correct thickness is vital to prevent compression loss and ensure long-term engine stability.Installation and maintenance guidance
For successful installation, technicians should clean the shim seat thoroughly and apply a light layer of oil before assembly to prevent scoring upon first start-up. It is essential to measure each valve individually rather than assuming uniform clearance across all cylinders. Always verify clearances after assembly before finalizing the valve cover installation.Preventative maintenance tips
Monitoring valve clearances at manufacturer-recommended intervals helps prevent rapid wear of contact surfaces. If clearance drifts out of specification, it may indicate that a shim replacement is required to maintain peak engine performance.OE cross-reference
1300 05 028 (Valve Adjusting Shim Engine Valve) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 1677356.Other OEMs
VOLVO
- 1677356
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| RENAULT TRUCKS | Magnum | DXi12 | |
| VOLVO | |||
| VOLVO | FH12 | D12C | |
| VOLVO | FH12 | D12D | |
| VOLVO | FH16 | D16C | |
| VOLVO | FM10 | D10A | |
| VOLVO | FM12 | D12C | |
| VOLVO | FM12 | D12D | |
| VOLVO | NH12 | D12C | |
| VOLVO | VHD | D12 | |
| VOLVO | VNL | D12 |
Vehicle and Engine Pages
FAQ
How do I verify if this shim fits my engine?
The most reliable method is cross-referencing the OE part number from the removed shim or cylinder head. Since dimensions can vary by engine code within a model series, always confirm the exact thickness required.
Why is precise thickness important for valve shims?
The correct grade prevents compression loss and prevents damage to the valve seating face. An incorrect thickness can cause the valve to bind or leave excessive play in the valvetrain.
Can I grind a used shim to adjust clearance?
No, you should never grind a shim. Sanding or grinding removes the hardened layer of the component and significantly shortens its service life; always install a new, correctly graded shim.
What are signs that shims need replacement?
Symptoms of incorrect clearance include compression loss or unusual engine noise. Regularly checking clearances at manufacturer-specified intervals helps prevent rapid wear on contact surfaces.
What are the OE reference numbers of this part?
1300 05 028 directly replaces Volvo OE number 1677356.