Skip to content
757 Views Updated

1677351 3.10 mm Valve Adjusting Shim for Volvo Engines

1300 05 023

Summary

This 3.10 mm valve adjusting shim is designed for Volvo engines, including D12C, D16C, and D12D series. It provides the precise thickness required to maintain correct valve clearance in heavy commercial vehicle engines, ensuring optimal performance and durability. Equivalent to OE Volvo 1677351.

Product identifiers
EAN Code8699031053424
Ready to Order
Get Information

Compatible OEM Codes

  • VOLVO
    • 1677351

Description

What does a valve adjusting shim do?

This precision-ground shim is a critical component within the engine valve train, specifically designed to maintain exact valve clearance in heavy commercial vehicle diesel engines. By adding the required thickness between the cam follower and the valve, it ensures that the valves seat fully during every cycle, preventing compression loss and protecting the valve seating face from premature wear.

Engine compatibility and fitment

This specific 3.10 mm grade is compatible with various Volvo engines, including the D12C, D16C, D12D, D12, VNL D12, FM12 (D12C/D12D), VHD D12, and FM10 (D10A) series. For accurate fitment, it is essential to cross-reference the thickness of the removed component or the engine code to ensure exact clearance specifications are met.

Installation and maintenance guidance

During installation, technicians should ensure the shim seat is completely clean and lightly lubricated to prevent scoring upon first start-up. It is highly recommended to measure each valve individually rather than assuming uniform thickness across all cylinders, as each valve may require a different grade to meet manufacturer tolerances.

Troubleshooting and selection

Regularly checking valve clearances at manufacturer-recommended intervals helps prevent rapid wear of contact surfaces and maintains engine efficiency. If unusual engine noise or compression issues occur, verify that the shims have not been improperly ground or damaged by uneven loading.

OE cross-reference

1300 05 023 (Valve Adjusting Shim Engine Valve) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 1677351.

Other OEMs

VOLVO

  • 1677351

Related Products

Compatible Vehicles

Compatible Vehicles
BrandModelModel TypeEngine
RENAULT TRUCKS Magnum DXi12
VOLVO
VOLVO FH12 D12C
VOLVO FH12 D12D
VOLVO FH16 D16C
VOLVO FM10 D10A
VOLVO FM12 D12C
VOLVO FM12 D12D
VOLVO NH12 D12C
VOLVO VHD D12
VOLVO VNL D12

Vehicle and Engine Pages

FAQ

How do I verify if this shim fits my engine?
The most reliable method is to cross-reference the thickness of the removed shim or check the engine code (such as D12C or D16C) against technical specifications.
Why is precise thickness important for valves?
Correct thickness ensures proper valve clearance; an incorrect grade can lead to insufficient clearance or excessive play, causing compression loss or mechanical damage.
Can I grind a shim to adjust the clearance?
No, you should never grind a shim as it removes the hardened layer and reduces its service life; always install a new shim of the correct grade.
What are the symptoms of incorrect valve clearance?
Incorrect clearance can cause increased engine noise, loss of power, increased fuel consumption, or rapid wear of the camshaft and rocker arms.
What are the OE reference numbers of this part?
1300 05 023 directly replaces Volvo OE number 1677351.