1677347 Volvo 2.90 mm Valve Adjusting Shim
1300 05 019
Summary
Precision 2.90 mm valve adjusting shim designed for heavy commercial vehicle engines. This component ensures accurate valve clearance in Volvo FH12, FM10, VNL, FM12, NH12, FH16, and VHD engines including D12 and D16 series. Consult your authorized distributor. Equivalent to OE Volvo 1677347.
| EAN Code | 8699031053387 |
|---|
Ready to Order
Compatible OEM Codes
-
VOLVO
- 1677347
Description
What does a valve adjusting shim do?
This precision-ground valve adjusting shim is engineered to maintain exact valve clearance within heavy commercial vehicle diesel engines. By providing a specific measured thickness between the cam follower and the valve, it ensures the valve seats fully during every engine cycle, preventing compression loss and protecting the valve seating face from premature wear.Compatible Volvo engines and models
This component is designed for use in various Volvo engine series, including the D12C, D12D, D10A, D12, D16C, and VHD applications found in FH12, FM10, VNL, FM12, NH12, FH16, and VHD models. It is highly compatible with these Volvo engines to maintain optimal performance under heavy-duty operating conditions.Installation and maintenance guidance
When performing engine maintenance, it is essential to measure each valve individually to determine the required grade. For optimal longevity, ensure the shim seat is clean and lightly lubricated before assembly to prevent scoring marks during initial start-up. Always verify the clearances after installation before sealing the engine cover.Selection and verification
To avoid application errors, always base your selection on the thickness requirements specified by the engine manufacturer. Using a shim with incorrect thickness can lead to binding or excessive play in the valve train. Check the compatibility list for further details.OE cross-reference
1300 05 019 (Valve Adjusting Shim Engine Valve) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 1677347.Other OEMs
VOLVO
- 1677347
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| RENAULT TRUCKS | Magnum | DXi12 | |
| VOLVO | |||
| VOLVO | FH12 | D12C | |
| VOLVO | FH12 | D12D | |
| VOLVO | FH16 | D16C | |
| VOLVO | FM10 | D10A | |
| VOLVO | FM12 | D12C | |
| VOLVO | FM12 | D12D | |
| VOLVO | NH12 | D12C | |
| VOLVO | VHD | D12 | |
| VOLVO | VNL | D12 |
Vehicle and Engine Pages
FAQ
How do I verify the correct shim thickness?
The most reliable method is cross-referencing the OE part number of the removed shim or checking the stamped thickness on the existing component using a micrometer.
Can I sand or grind a used shim to adjust clearance?
No, you should never grind a shim as this removes the hardened layer and significantly shortens its service life; always install a new shim of the correct grade.
What are the symptoms of incorrect valve clearance?
Incorrect clearance can lead to compression loss, increased engine noise, or rapid wear of the cam follower and valve seating faces.
Is it necessary to replace shims individually?
Yes, each valve should be measured individually because different valves within the same engine may require different thickness grades to maintain proper clearance.
What are the OE reference numbers of this part?
1300 05 019 directly replaces Volvo OE number 1677347.