Skip to content
899 Views Updated

1547976 Valve Adjusting Shim for Volvo Engines

1300 05 010

Summary

Precision 2.45 mm valve adjusting shim designed for Volvo heavy commercial vehicle engines. This high-strength component ensures accurate valve clearance in Volvo D12, D16, and D10 series engines used in trucks and buses. Consult your authorized distributor. Equivalent to OE Volvo 1547976.

Product identifiers
EAN Code8699031053295
Ready to Order
Get Information

Compatible OEM Codes

  • VOLVO
    • 1547976

Description

What does a valve adjusting shim do?

This valve adjusting shim is a precision-ground component designed to maintain the exact valve clearance required by heavy commercial vehicle diesel engines. By providing a specific measured thickness between the cam follower and the valve, it ensures that the valve seating occurs correctly during every engine cycle, preventing compression loss and protecting the valve train components.

Compatible Volvo engines and models

This specific 2.45 mm shim is compatible with several Volvo engine series, including the D12, D16C, D10A, and D12D/D12C engines. It is widely used in heavy-duty applications such as Volvo FH series, FM series, VHD, VNL, and NH12 trucks. The correct thickness is critical to prevent excessive wear or insufficient clearance within the cylinder head assembly.

Installation and maintenance guidance

For optimal performance, technicians should ensure the shim seat is clean and lightly lubricated before installation to prevent scoring during initial start-up. It is highly recommended to measure each valve individually rather than assuming uniform clearance across all cylinders. Always verify clearances after assembly to ensure they meet the manufacturer's specifications for the specific engine code.

Importance of precise adjustment

Maintaining proper valve clearance prevents rapid wear on contact surfaces and avoids potential damage to the cam profile. When replacing shims, always use high-strength components that match the original thickness to ensure long-term durability under continuous impact loading.

OE cross-reference

1300 05 010 (Valve Adjusting Shim Engine Valve) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 1547976.

Other OEMs

VOLVO

  • 1547976

Related Products

Compatible Vehicles

Compatible Vehicles
BrandModelModel TypeEngine
RENAULT TRUCKS Magnum DXi12
VOLVO
VOLVO FH12 D12C
VOLVO FH12 D12D
VOLVO FH16 D16C
VOLVO FM10 D10A
VOLVO FM12 D12C
VOLVO FM12 D12D
VOLVO NH12 D12C
VOLVO VHD D12
VOLVO VNL D12

Vehicle and Engine Pages

FAQ

How do I verify the correct thickness for my engine?
The most reliable method is cross-referencing the OE part number of the removed shim or using a micrometer to measure the current thickness against manufacturer specifications.
Can I sand or grind a used shim to adjust clearance?
No, you should never grind a shim as this removes the hardened layer and shortens its service life; always install a new shim of the correct grade.
What are the symptoms of incorrect valve clearance?
Incorrect clearance can lead to compression loss, increased engine noise, or rapid wear of the cam follower and valve seating surfaces.
Which Volvo engines use this 2.45 mm shim?
This shim is designed for various Volvo series including D12, D16C, D10A, and other heavy commercial diesel engines used in FH and FM models.
What are the OE reference numbers of this part?
1300 05 010 directly replaces Volvo OE number 1547976.