Skip to content
778 Views Updated

1547971 Valve Adjusting Shim for Volvo Engines

1300 05 005

Summary

High-strength 2.20 mm valve adjusting shim designed for Volvo heavy commercial vehicle engines, including D12, D16C, and D10A series. Ensures precise valve clearance maintenance for optimal engine performance. Equivalent to OE Volvo 1547971.

Product identifiers
EAN Code8699031053240
Ready to Order
Get Information

Compatible OEM Codes

  • VOLVO
    • 1547971

Description

What does a valve adjusting shim do?

This valve adjusting shim is a precision component designed to maintain exact valve clearance within heavy commercial vehicle diesel engines. By providing a specific measured thickness between the cam follower and the valve, it ensures the valve seating remains within manufacturer tolerances, preventing compression loss and protecting the valve seating face from premature wear.

Compatible Volvo engines and models

This specific 2.20 mm shim is compatible with various Volvo engine series, including the D12, D16C, D10A, and D12D/D12C models found in FH, FM, VNL, and VHD trucks. It is also fitted to Volvo NH12 and FH16 engine configurations to ensure reliable valve train operation under heavy-duty conditions.

Installation and maintenance guidance

For professional technicians, it is essential to measure each valve individually before selection, as each cylinder may require a different grade to maintain correct clearance. When installing the shim, ensure the seat is clean and lightly lubricated to prevent scoring during the first start-up cycle. Always verify the clearance again after assembly before closing the engine cover.

Importance of correct thickness selection

Selecting the correct thickness is critical to prevent excessive play or binding in the valve train.

OE cross-reference

1300 05 005 (Valve Adjusting Shim Engine Valve) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 1547971.

Other OEMs

VOLVO

  • 1547971

Related Products

Compatible Vehicles

Compatible Vehicles
BrandModelModel TypeEngine
RENAULT TRUCKS Magnum DXi12
VOLVO
VOLVO FH12 D12C
VOLVO FH12 D12D
VOLVO FH16 D16C
VOLVO FM10 D10A
VOLVO FM12 D12C
VOLVO FM12 D12D
VOLVO NH12 D12C
VOLVO VHD D12
VOLVO VNL D12

Vehicle and Engine Pages

FAQ

How do I ensure the correct shim thickness for my engine?
The most reliable method is cross-referencing the OE part number from the removed shim or cylinder head. You can also use a micrometer to verify the thickness of the existing component.
Can I sand or grind a shim to adjust the thickness?
No, you should never grind a shim. Sanding removes the hardened layer of the component, which significantly shortens its service life and leads to rapid wear.
What are the symptoms of incorrect valve clearance?
Incorrect clearance can lead to compression loss, increased engine noise, or excessive wear on the cam follower and valve seating surfaces.
Should I replace all shims at once?
It is best practice to measure every valve individually rather than assuming all cylinders require the same grade, as each may need a specific thickness for precise adjustment.
What are the OE reference numbers of this part?
1300 05 005 directly replaces Volvo OE number 1547971.