WABCO ABS Solenoid Modulator Valve OEM Number Cross Reference
Look up the OEM number on your ABS solenoid modulator valve or repair kit and find the matching VADEN part. This page lists 36 WABCO OEM numbers cross-referenced to 34 VADEN products.
ABS solenoid modulator valves hold, release or reapply brake chamber air at each wheel or axle on command from the ABS control unit, preventing wheel lock under braking. Find the OEM number from the valve label or kit packaging in the left column; the VADEN part number on the same row is the equivalent. VADEN parts are aftermarket parts, not original WABCO parts: confirm fitment with the OEM number and product page data, and follow the vehicle manufacturer's service documentation.
| WABCO OEM number | VADEN part number |
|---|---|
| 4721959262 | 303.14.0001.03 |
All VADEN parts in this category with photos and technical data.
Go to category →For fault symptoms, replacement steps and care of relay and ABS relay valves, read our guide:
Read the guide →All WABCO part groups with OEM number tables.
All WABCO OEM pages →Read the OEM number on the valve body label or on the repair kit packaging and find it in the left column of the table. The VADEN part number on the same row is the equivalent. Open its product page to check the connector type, port layout and listed applications before ordering.
Replace the complete valve if the solenoid coil fails an electrical check, the housing is cracked or the valve does not respond to the ABS control unit. If the problem is limited to worn seals or diaphragms causing air leaks, a repair kit for the same OEM number can be enough. After either job, clear the ABS fault codes and confirm the warning lamp goes out.
No. VADEN parts are aftermarket parts, not original WABCO parts. The OEM number is used only as a cross reference. Confirm fitment with the OEM number and the data on the VADEN product page, and treat the vehicle manufacturer's service documentation as the final reference.