FTE Brake Master Cylinder OEM Number Cross Reference

FTE Brake Master Cylinder OEM Number Cross Reference

FTE Brake Master Cylinder OEM Number Cross Reference

20 FTE OEM numbers for brake master cylinders and repair kits, matched to 10 VADEN aftermarket parts. Search the OEM number on your part to find the VADEN part number.

FTE brake master cylinder OEM numbers and VADEN equivalents

In commercial vehicles with hydraulic brakes, the brake master cylinder converts pedal force into hydraulic pressure for the wheel brakes; the repair kit renews its seals and wear parts. The table lists each FTE OEM number next to the matching VADEN part number, so you can look up the number on your old part. VADEN parts are aftermarket parts, not original FTE parts: confirm fitment with the OEM number and the product page data, and follow the vehicle manufacturer's service documentation.

Brake Master Cylinder Repair Kit: FTE OEM numbers and VADEN equivalents (5)
FTE OEM numberVADEN part number
RK3452306.02.0010.01
RK3866306.02.0013.01
9883002306.02.0013.01
9883006306.02.0010.01
H3172003S1306.02.0100.01

Related pages

Category: Brake Master Cylinders

All VADEN parts in this category with photos and technical data.

Go to category →
Brake Master Cylinder: Faults, Replacement & Care Guide

For fault symptoms, replacement steps and care, read our guide:

Read the guide →
FTE OEM cross reference

All FTE part groups with OEM number tables.

All FTE OEM pages →

Other FTE OEM cross reference pages

Master Cylinders Clutch Servo Clutch: other parts

Frequently asked questions

How do I find the VADEN brake master cylinder for a FTE OEM number?

Read the OEM number on the old cylinder or in the parts documentation, then search it in the table above or in the site search. The VADEN part number in the same row leads to the product page, where you can compare the OEM references and product details before ordering.

Should I replace the complete master cylinder or only fit a repair kit?

If the cylinder bore is clean and free of scoring or corrosion, a repair kit that renews the seals can be enough; if the housing is worn, damaged or leaking from the body, replace the complete cylinder. Bleed the brake system after either job and follow the vehicle manufacturer's service documentation.

Are VADEN brake master cylinders original FTE parts?

No. VADEN parts are aftermarket parts made by VADEN, not original FTE parts. The OEM number is shown for cross reference only; confirm fitment with the OEM number and the product page data, and follow the vehicle manufacturer's service documentation.

Top Scroller