SEB01886 Knorr-Bremse compatible Cylinder Head
25 22 10
Summary
This compressor cylinder head is a critical service component designed to seal the compression chamber of heavy commercial vehicle air brake compressors. It is compatible with Knorr-Bremse systems and is manufactured from heavy-duty grade materials to ensure reliable air output and temperature regulation in demanding environments. Equivalent to OE Knorr-Bremse SEB01886.
| EAN Code | 8699031069241 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- SEB01886
Description
What does a compressor cylinder head do?
This compressor cylinder head acts as the cast service component that sits on top of an air brake compressor's cylinder block to seal the compression chamber from above. It is a vital part for workshop technicians looking to rebuild a compressor in place rather than replacing the entire unit. By providing the necessary seats for inlet and discharge valves, this part directly governs both air output and operating temperature.Compatible systems and applications
This component is compatible with Knorr-Bremse systems and is used in various heavy commercial vehicle air brake applications. Because different engine options may require different compressor architectures, always verify the specific fitment requirements for the unit being serviced.Installation and maintenance guidance
During installation, technicians should carefully inspect the valve seats and internal air passages within the head. Ensuring a precise seal against the cylinder block is essential to prevent pressure leaks and maintain consistent pneumatic performance throughout the braking system.Troubleshooting and inspection
Regular inspection of the cylinder head can help identify early signs of wear or scaling that might affect compressor efficiency.OE cross-reference
25 22 10 (Compressor Cylinder Head) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number SEB01886.Other OEMs
KNORR-BREMSE
- SEB01886
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| CUMMINS | |||
| CUMMINS | ISBe | ||
| CUMMINS | ISDe | ||
| CUMMINS | ISLe | ||
| DONGFENG | Captain | ISBe | |
| DONGFENG | Duolika | ISBe | |
| DONGFENG | Kinland | ISLe | |
| DONGFENG | Tianjin | ISBe | |
| DONGFENG | Tianjin | ISLe | |
| FORD | Cargo | ISBe | |
| IVECO BUS | Metro | ISLe | |
| KAMAZ | 4308 | ISBe | |
| KAMAZ | 5308 | ISBe | |
| KAMAZ | 65115 | ISBe | |
| KAMAZ | 65115 | ISLe | |
| KAMAZ | 6520 | ISLe | |
| KNORR-BREMSE | |||
| LIAZ | 5292 | ISBe | |
| NEFAZ | 5299 | ISBe | |
| PAZ | 3204 | ISBe | |
| PAZ | 3237 | ISBe | |
| VOLKSWAGEN | Constellation | ISBe | |
| YUTONG | ZK6118 | ISBe | |
| YUTONG | ZK6118 | ISLe | |
| YUTONG | ZK6125 | ISLe | |
| ZHONGTONG | LCK6118 | ISBe | |
| ZHONGTONG | LCK6118 | ISLe |
Vehicle and Engine Pages
FAQ
What is the function of a compressor cylinder head?
The cylinder head seals the compression chamber from above and contains the seats for inlet and discharge valves, directly managing air output.
Can this part be used to rebuild an existing compressor?
Yes, this component allows a workshop technician to rebuild a compressor in place by replacing only the top cover instead of the whole unit.
How do I ensure compatibility with my vehicle?
Selection should be based on the specific compressor architecture; always check if your unit requires a single-cylinder, twin-cylinder, or water-cooled design.
What are common signs of cylinder head wear?
Issues such as inconsistent air output or overheating often indicate that the valve seats or internal passages within the head need attention.
What are the OE reference numbers of this part?
25 22 10 directly replaces Knorr-Bremse OE number SEB01886.