MCK1170 Meritor Compatible DX 175 Dust Boot
| Caliper |
|
|---|---|
| MERITOR |
|
| EAN Code | 8683457035942 |
Ready to Order
Summary
This dust boot is designed for Meritor DX 175 air disc brake caliper pin systems. It provides a protective seal to maintain optimal braking performance and prevent premature wear of the sliding pins. Equivalent to OE Meritor MCK1170.
What's in this kit
-
4104036 Brake Caliper Cover Bolt M8 x 1.25 / 16 mm
-
4104034 Brake Caliper Cover Plate M10 x 1.5 / 20 mm
-
4104035 Brake Caliper Cover Plate M10 x 1.5 / 25 mm
-
4104028 Brake Caliper Pin Bolt M14 x 1.5 / 70 mm
-
4104029 Brake Caliper Pin Bolt M14 x 1.5 / 50 mm
-
4105020 Brake Caliper Pin Bushing Ø 28 x 32 / 24.80 mm
-
4115030 Brake Caliper Pin Cover Ø 37 / 25 mm
-
4104030 Brake Caliper Tappet Bolt M8 x 1.25 / 20 mm
-
4123014 Brake Caliper Cover Gasket
-
4104037 Brake Caliper Cover Plate
-
4120001 Brake Caliper Cover Plate
-
4101021 Brake Caliper Pin
-
4101022 Brake Caliper Pin
-
4102028 Brake Caliper Pin Dust Boot
-
4102029 Brake Caliper Tappet Dust Boot
-
3524003 Grease 7 gr
-
4115023 Pad Holder Repair Kit
-
4115024 Pad Holder Repair Kit
Kits that include this kit 2
Compatible OEM Codes
-
MERITOR
- MCK1170
Description
What does a brake caliper pin dust boot do?
This dust boot serves a critical role in the air disc brake system by sealing the caliper pin mechanism. By preventing moisture, salt, and road debris from entering the sliding pin assembly, it helps avoid corrosion and ensures smooth caliper movement during braking cycles.Compatibility with Meritor systems
This component is specifically engineered for use in Meritor DX 175 systems. It provides an equivalent fitment for workshop technicians looking to maintain heavy commercial vehicle braking performance through reliable sealing.Maintenance and inspection guidance
During maintenance, technicians should inspect the dust boots for any signs of tearing or degradation. A compromised boot can allow contaminants to reach the pins, leading to binding and uneven pad wear. Replacing worn boots during routine service helps prevent more costly repairs to the caliper assembly.Preventing system wear
Regular inspection of the entire braking mechanism is recommended to ensure that all seals are intact and providing adequate protection against environmental elements.OE cross-reference
4151023 (Brake Caliper Pin Dust Boot) is the equivalent of the Meritor OE number. This part directly replaces Meritor OE number MCK1170.Other OEMs
MERITOR
- MCK1170
FAQ
What is the purpose of a caliper pin dust boot?
It protects the sliding pins from moisture, dirt, and road salt to prevent corrosion and ensure smooth movement within the air disc brake system.
How can I tell if a dust boot needs replacement?
Inspect the boots for cracks, tears, or signs of degradation. Torn boots allow contaminants to enter, which can lead to pin binding or uneven pad wear.
Is this part compatible with Meritor systems?
Yes, this component is designed as an equivalent for use in Meritor DX 175 air disc brake caliper assemblies.
How does a damaged boot affect braking?
A damaged boot can allow dirt into the mechanism, causing the pins to bind. This often results in uneven pad wear or delayed pad contact.
What are the OE reference numbers of this part?
4151023 directly replaces Meritor OE number MCK1170.