K052759K50 Pin Repair Kit for Knorr-Bremse SN7 SN6 SK7
| Caliper |
|
|---|---|
| KNORR-BREMSE |
|
| EAN Code | 8683457010857 |
Ready to Order
Summary
This brake caliper pin repair kit is designed for heavy commercial vehicle air disc brake systems. It is compatible with Knorr-Bremse SN7, SN6, and SK7 caliper families, ensuring reliable guide pin movement and balanced pad pressure. Equivalent to OE Knorr-Bremse K052759K50.
What's in this kit
-
3501005 Brake Caliper Pin Ø 36 / 114 mm
-
3501014 Brake Caliper Pin Ø 32 / 88 mm
-
3504002 Brake Caliper Pin Bolt M16 x 1.5 / 85 mm
-
3504006 Brake Caliper Pin Bolt M16 x 1.5 / 80 mm
-
3502012 Brake Caliper Pin Bushing Ø 39 mm
-
3505001 Brake Caliper Pin Bushing Ø 36 x 40 / 82 mm
-
3515007 Brake Caliper Pin Cover Ø 40 / 14.5 mm
-
3502002 Brake Caliper Pin Dust Boot
-
3503001 Brake Caliper Pin Dust Boot
-
3524003 Grease 7 gr
Compatible OEM Codes
-
KNORR-BREMSE
- K052759K50
Description
What does a pin repair kit do?
This brake caliper pin repair kit serves as a critical component for maintaining the sliding mechanism within an air disc brake caliper. By renewing the guide pins and associated seals, workshop technicians can ensure the caliper slides freely on the disc, which is essential for balanced pad pressure and even brake wear. Using high-strength components helps prevent seizing caused by corrosion or debris buildup.Compatible vehicle systems and models
This kit is specifically designed for use in Knorr-Bremse SN7, SN6, and SK7 caliper systems. It provides a reliable solution for maintaining the braking performance of heavy commercial vehicles equipped with these specific air disc brake assemblies. Check the compatibility list.Installation and maintenance guidance
During installation, it is vital to ensure that all contact surfaces are clean and free of old grease or debris. Proper lubrication using grease compatible with elastomer boots is necessary to prevent premature failure of the seals. Technicians should check the condition of the boots and bushings to determine if a complete overhaul kit or a specific pin set is required for the service.Maintenance and troubleshooting
Regular inspection of the caliper pins can prevent more significant system issues, such as uneven pad wear or brake pulsation. Replacing worn pins and seals proactively helps maintain the integrity of the entire air brake system.OE cross-reference
3551050 (Brake Caliper Pin Repair Kit) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number K052759K50.Other OEMs
KNORR-BREMSE
- K052759K50
FAQ
What is the function of a caliper pin repair kit?
It provides the necessary components to restore the sliding movement of the brake caliper pins, ensuring even pressure on the pads.
Is this kit compatible with Knorr-Bremse calipers?
Yes, this kit is designed to be compatible with Knorr-Bremse SN7, SN6, and SK7 type air disc brake calipers.
When should I replace the caliper pins?
Replacement is recommended if there is evidence of uneven pad wear, seized movement, or visible corrosion on the guide pins.
Can I use any grease for the installation?
No, it is critical to use grease specifically compatible with elastomer boots to avoid swelling and premature seal failure.
What are the OE reference numbers of this part?
3551050 directly replaces Knorr-Bremse OE number K052759K50.