K048371K50 Knorr-Bremse Compatible Pin Repair Kit
| Caliper |
|
|---|---|
| KNORR-BREMSE |
|
| EAN Code | 8683457006720 |
Ready to Order
Summary
This brake caliper pin repair kit is designed for heavy commercial vehicle air brake systems. It provides an economical alternative to full caliper replacement for Knorr-Bremse SB6 and SB7 series, ensuring precise movement and preventing premature wear of the caliper assembly. Equivalent to OE Knorr-Bremse K048371K50.
What's in this kit
-
3501005 Brake Caliper Pin Ø 36 / 114 mm
-
3501006 Brake Caliper Pin Ø 32 / 80 mm
-
3504002 Brake Caliper Pin Bolt M16 x 1.5 / 85 mm
-
3504006 Brake Caliper Pin Bolt M16 x 1.5 / 80 mm
-
3502014 Brake Caliper Pin Bushing Ø 39 mm
-
3505001 Brake Caliper Pin Bushing Ø 36 x 40 / 82 mm
-
3515003 Brake Caliper Pin Cover Ø 54 / 28 mm
-
3518001 Brake Caliper Pin Cover
-
3502002 Brake Caliper Pin Dust Boot
-
3503001 Brake Caliper Pin Dust Boot
-
3524003 Grease 7 gr
Compatible OEM Codes
-
MAN
- 81.50822.6036
- 81.50822-6036
-
ZF
- 0501 218 609
-
SCANIA
- 2121648
-
KNORR-BREMSE
- K048371K50
Description
What does a pin repair kit do?
This brake caliper pin repair kit serves as a critical maintenance solution for air disc brake systems. By replacing worn guide pins and seals, technicians can restore the smooth sliding action required for consistent braking force. Using high-strength components ensures the longevity of the caliper assembly under heavy-duty operating conditions.Vehicle and system compatibility
This kit is specifically designed for use in Knorr-Bremse SB6 and SB7 series air disc brake calipers. It provides an essential service solution for fleet managers and workshop technicians looking to maintain braking reliability on heavy commercial vehicles. Check the compatibility list.Installation and maintenance
During installation, ensure that all contact surfaces are clean and free of debris. Proper lubrication with grease compatible with elastomer boots is vital to prevent seizing or premature rubber degradation. Regular inspection of the pins and boots can prevent costly caliper housing corrosion.Service guidance
Choosing a repair kit instead of a complete caliper replacement is often the most cost-effective method for servicing worn guide mechanisms, provided the caliper housing remains structurally sound.OE cross-reference
3551025 (Brake Caliper Pin Repair Kit) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number K048371K50.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| MAN | |||
| SCANIA | |||
| ZF |
Vehicle and Engine Pages
Other OEMs
KNORR-BREMSE
- K048371K50
MAN
- 81508226036
- 81.50822.6036
- 81.50822-6036
SCANIA
- 2121648
ZF
- 501218609
- 0501218609
- 0501 218 609
FAQ
What is the benefit of using a pin repair kit?
A repair kit allows for the overhaul of the existing caliper by replacing worn pins, boots, or bushings, which is more economical than replacing the entire caliper unit.
Which systems is this kit compatible with?
This specific kit is designed to be compatible with Knorr-Bremse SB6 and SB7 air disc brake caliper systems.
Can I use general purpose grease for installation?
No, it is critical to use grease specifically compatible with elastomer boots to prevent swelling or premature failure of the seals.
When should I replace the entire caliper instead of using a kit?
If the caliper housing shows signs of heavy corrosion or structural cracks, a full replacement is required rather than a simple pin repair.
What are the OE reference numbers of this part?
3551025 directly replaces Knorr-Bremse OE number K048371K50.