K023811 Knorr-Bremse Compatible Compressor Cylinder Head
25 27 10
Summary
This compressor cylinder head is a high-strength component designed for air brake compressors. It serves as a critical sealing element for the compression chamber, ensuring reliable air output and temperature regulation in heavy commercial vehicle braking systems. Compatible with Knorr-Bremse systems. Equivalent to OE Knorr-Bremse K023811.
| EAN Code | 8699031069746 |
|---|
Ready to Order
Compatible OEM Codes
-
KNORR-BREMSE
- K023811
- K006284
-
CUMMINS
- 5290036
Description
What does a compressor cylinder head do?
This compressor cylinder head is a precision-engineered component that sits atop the air brake compressor cylinder block to seal the compression chamber. It functions as the primary interface for air movement, housing the essential valve seats and internal passages required for efficient air production. By providing a secure seal, this component prevents pressure loss and maintains consistent system performance during heavy-duty operation.Compatibility and application
This part is designed to be compatible with Knorr-Bremse systems. It is an essential replacement component used by workshop technicians to facilitate the rebuilding of existing compressor units, allowing for efficient maintenance without the need to replace the entire compressor assembly.Installation and maintenance
When performing installation, technicians should carefully inspect the cylinder block surface and ensure all seating areas are free of debris. Proper torque application is vital to maintain the seal integrity of the cylinder head and prevent leaks in the pneumatic circuit. Maintaining correct clearance and checking valve seat condition during replacement ensures long-term reliability.Selection guidance
Selecting the correct head variant is crucial, as designs may vary based on whether the compressor is single-cylinder or twin-cylinder, or whether it requires air or water cooling features. Consult your authorized distributor.OE cross-reference
25 27 10 (Compressor Cylinder Head) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number K023811.Other OEMs
CUMMINS
- 5290036
KNORR-BREMSE
- K023811
- K006284
Related Products
Used In
Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| CUMMINS | |||
| CUMMINS | ISBe | ||
| CUMMINS | ISDe | ||
| CUMMINS | ISLe | ||
| DONGFENG | Captain | ISBe | |
| DONGFENG | Duolika | ISBe | |
| DONGFENG | Kinland | ISLe | |
| DONGFENG | Tianjin | ISBe | |
| DONGFENG | Tianjin | ISLe | |
| FORD | Cargo | ISBe | |
| IVECO BUS | Metro | ISLe | |
| KAMAZ | 4308 | ISBe | |
| KAMAZ | 5308 | ISBe | |
| KAMAZ | 65115 | ISBe | |
| KAMAZ | 65115 | ISLe | |
| KAMAZ | 6520 | ISLe | |
| KNORR-BREMSE | |||
| LIAZ | 5292 | ISBe | |
| NEFAZ | 5299 | ISBe | |
| PAZ | 3204 | ISBe | |
| PAZ | 3237 | ISBe | |
| VOLKSWAGEN | Constellation | ISBe | |
| YUTONG | ZK6118 | ISBe | |
| YUTONG | ZK6118 | ISLe | |
| YUTONG | ZK6125 | ISLe | |
| ZHONGTONG | LCK6118 | ISBe | |
| ZHONGTONG | LCK6118 | ISLe |
Vehicle and Engine Pages
FAQ
What is the function of a compressor cylinder head?
The cylinder head seals the compression chamber from above and houses the inlet and discharge valve seats, directly governing air output and running temperature.
Can this part be used to rebuild an existing compressor?
Yes, this component allows workshop technicians to rebuild a compressor in place rather than replacing the entire unit, making it a cost-effective maintenance solution.
What should be checked during installation?
Technicians should verify that the cylinder block surface is clean and ensure that all sealing surfaces are correctly aligned to prevent pneumatic leaks.
Is there a difference between cooling types for these heads?
Yes, heads vary by architecture; some are designed for air cooling via external fins, while others feature internal jacket channels for water cooling under high loads.
What are the OE reference numbers of this part?
25 27 10 directly replaces Knorr-Bremse OE number K023811.