II304130065 SB6 Brake Caliper Tappet and Dust Boot
| Diameter | Ø 74 mm |
|---|---|
| Caliper |
|
| KNORR-BREMSE |
|
| EAN Code | 8699031094984 |
Ready to Order
Summary
This SB6 tappet and dust boot is designed for Knorr-Bremse air disc brake caliper systems. It features a Ø 74 mm diameter to ensure precise sealing and long-term durability under heavy-duty operating conditions in commercial vehicle braking systems. Equivalent to OE Knorr-Bremse II304130065.
Compatible OEM Codes
-
SCANIA
- 1759811
- 1746824
- 1390429
-
MERCEDES BENZ
- 000 420 48 82
- 000 420 39 82
- 000 420 06 82
-
MAN
- 81.50822-6022
- 81.50822-6007
-
KNORR-BREMSE
- II304130065
- II179320065
-
SAF
- 3434380400
Description
What does a tappet and dust boot do?
This tappet and dust boot assembly plays a critical role in the air disc brake caliper system by protecting moving components from contaminants. By maintaining a secure seal around the tappet, it prevents road salt, moisture, and debris from entering the internal mechanism, which is essential for preventing premature wear of the braking components.Compatibility and fitment
This specific kit is compatible with Knorr-Bremse SB6 systems. It is designed to maintain the structural integrity of the braking mechanism under high thermal loads and constant pressure cycles common in heavy commercial vehicle applications.Installation and maintenance
When performing maintenance, technicians should verify that the Ø 74 mm diameter matches the existing component exactly. It is recommended to inspect the caliper body for any signs of debris or uneven wear before installing the new boot to ensure a perfect seal. Proper lubrication of the tappet during installation can further extend the service life of the assembly.Selection guidance
For optimal performance, always verify compatibility with the specific caliper model and axle position, as different mounting requirements may apply to front or rear configurations.OE cross-reference
3556006 (Brake Caliper Tappet and Dust Boot) is the equivalent of the Knorr-Bremse OE number. This part directly replaces Knorr-Bremse OE number II304130065.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| BPW | |||
| MAN | |||
| MERCEDES BENZ | |||
| SAF | |||
| SCANIA |
Vehicle and Engine Pages
Other OEMs
BPW
- 0980102630
- 09.801.02.63.0
KNORR-BREMSE
- II304130065
- II179320065
MAN
- 81508226022
- 81508226007
- 81.50822.6022
- 81.50822.6007
- 81.50822-6022
- 81.50822-6007
MERCEDES BENZ
- A0004204882
- A0004203982
- A0004200682
- 0004204882
- 0004203982
- 0004200682
- 000.420.4882
- 000.420.48.82
- 000.420.3982
- 000.420.39.82
- 000.420.0682
- 000.420.06.82
- 000 420 48 82
- 000 420 39 82
- 000 420 06 82
SAF
- 3.434.3804.00
- 3434380400
SCANIA
- 1759811
- 1746824
- 1390429
FAQ
What is the primary function of this tappet and dust boot?
The assembly seals the air disc brake caliper mechanism, protecting the internal tappet from road salt, water, and grit to prevent corrosion.
Which vehicle systems is this part compatible with?
This component is designed specifically for Knorr-Bremse SB6 air disc brake caliper systems used in heavy commercial vehicles.
How do I ensure correct fitment for my caliper?
Verify that the Ø 74 mm diameter matches your current component and confirm that your caliper follows the Knorr-Bremse SB6 design profile.
What should I check during installation?
Ensure the caliper mounting surface is clean and use high-quality lubricants to facilitate proper movement of the tappet within the boot.
What are the OE reference numbers of this part?
3556006 directly replaces Knorr-Bremse OE number II304130065.