271163 Dust Boot for Volvo Caliper Pins
| Caliper |
|
|---|---|
| EAN Code | 8683457035713 |
Ready to Order
Summary
High-strength caliper pin dust boot designed for heavy commercial vehicle braking systems. Specifically compatible with Volvo trucks to ensure proper seal integrity and protection of sliding components against debris. Equivalent to OE Volvo 271163.
What's in this kit
-
4515001 Brake Caliper Pin Cover Ø 22 / 12 mm
-
4515002 Brake Caliper Pin Cover Ø 22 / 8 mm
-
4502011 Brake Caliper Pin Piston Ø 58 mm
-
4502012 Brake Caliper Pin Piston Ø 58 mm
-
4502013 Brake Caliper Mechanism Crank
-
4518001 Brake Caliper Mechanism O-Ring
-
4518002 Brake Caliper Mechanism O-Ring
-
4502015 Brake Caliper Mechanism Plastic
-
4520001 Brake Caliper Mechanism Ring
-
4520002 Brake Caliper Mechanism Ring
-
4502014 Brake Caliper Mechanism Seal
-
4502001 Brake Caliper Pin Dust Boot
-
3524003 Grease 7 gr
Compatible OEM Codes
-
VOLVO
- 3090939
- 3090356
- 271163
-
MERITOR
- SP9669
-
MAN
- STRSP9669
-
DAF
- 1522162
Description
What does a caliper pin dust boot do?
This brake caliper pin dust boot plays a critical role in maintaining the integrity of the air disc brake system. By providing a secure seal around the sliding pins, it prevents moisture, road salt, and abrasive contaminants from entering the mechanism, which helps prevent pin seizure and uneven brake wear.Vehicle and system compatibility
Designed for heavy-duty applications, this component is compatible with Volvo trucks. It ensures that the caliper pins remain lubricated and free from external debris, maintaining consistent braking performance during demanding service cycles.Installation and maintenance guidance
For optimal maintenance, technicians should inspect the boot for cracks or hardening during every brake pad replacement. It is essential to use high-temperature, rubber-compatible grease during assembly to prevent the material from swelling. Ensure both ends of the bellows seat fully in the bore without twisting to maintain a proper seal.Troubleshooting and inspection
Properly seated boots are vital to prevent premature wear of the caliper assembly. If any tearing or hardening is detected during visual inspections, immediate replacement is recommended to avoid costly brake system failures.OE cross-reference
4551007 (Brake Caliper Pin Dust Boot) is the equivalent of the Volvo OE number. This part directly replaces Volvo OE number 271163.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DAF | |||
| MAN | |||
| MERITOR | |||
| VOLVO |
Vehicle and Engine Pages
Other OEMs
DAF
- 1522162
MAN
- STRSP9669
MERITOR
- SP9669
VOLVO
- 3090939
- 3090356
- 271163
FAQ
What is the function of a caliper pin dust boot?
The dust boot seals the caliper pin, protecting it from moisture and road contaminants that cause corrosion or seizing.
When should I inspect the caliper pin boots?
It is best practice to visually inspect boots for cracks or tears whenever the brake pads are being replaced.
Can any grease be used during installation?
No, you must use high-temperature, rubber-compatible grease to prevent the boot material from swelling or degrading.
What happens if a dust boot is damaged?
A damaged boot can allow contaminants to reach the pin, leading to seized calipers and uneven braking performance.
What are the OE reference numbers of this part?
4551007 directly replaces Volvo OE number 271163.