10326485 Dust Boot for Liebherr Caliper Pins
| Caliper |
|
|---|---|
| WABCO |
|
| EAN Code | 8683457006911 |
Ready to Order
Summary
High-strength dust boot designed for Liebherr air disc brake caliper pins. This component ensures the protection of critical sliding mechanisms in heavy commercial vehicle braking systems. Engineered to withstand demanding operating conditions and prevent contamination of the caliper pin assembly. Equivalent to OE Liebherr 10326485.
What's in this kit
-
4001003 Brake Caliper Pin Ø 38 / 118 mm
-
4001004 Brake Caliper Pin Ø 37.7 / 76 mm
-
4004004 Brake Caliper Pin Bolt M16 x 1.5 / 120 mm
-
4004005 Brake Caliper Pin Bolt M16 x 1.5 / 80 mm
-
4005003 Brake Caliper Pin Bushing Ø 38 x 42 / 30 mm
-
4015003 Brake Caliper Pin Cover Ø 42 / 28 mm
-
4015004 Brake Caliper Pin Cover Ø 42 / 17 mm
-
4002007 Brake Caliper Pin Dust Boot
-
4002008 Brake Caliper Pin Dust Boot
-
4020001 Brake Caliper Pin Dust Boot
-
4002004 Brake Caliper Rubber Plug
-
4002006 Brake Caliper Tappet Dust Boot
-
3524003 Grease 7 gr
Kits that include this kit 2
Compatible OEM Codes
-
SCANIA
- 2093080
- 1748132
- 1723418
-
SAF
- 3 434 3827 01
- 3 434 3827 00
-
YORK
- 79787365
-
WABCO
- 12 999 738VT
-
SCHWARZMULLER
- 46780
-
SCHMITZ CARGOBULL
- 1020777
-
LIEBHERR
- 10326485
-
HENDRICKSON
- 46780
-
DAF
- 1505890
Description
What does a caliper pin dust boot do?
This dust boot is a critical component designed to protect caliper pins within the air disc brake system. By sealing the pin against external contaminants, it maintains the smooth movement of the sliding mechanism, which is essential for consistent braking performance in heavy commercial vehicles.Compatibility with Liebherr equipment
This specific part is compatible with Liebherr vehicles and equipment. It is engineered to fit precisely within the caliper assembly, ensuring that debris and moisture do not enter the pin bore, which prevents premature wear and seizing of the braking mechanism.Maintenance and installation guidance
When performing maintenance, technicians should inspect the condition of the rubber boots for any cracks or tears. Replacing worn boots during a caliper service helps prevent uneven pad wear and ensures the longevity of the braking system components.Troubleshooting seal integrity
Proper installation of this boot is vital to maintain correct pin travel and prevent air or moisture ingress into the guide pin assembly.OE cross-reference
4051018 (Brake Caliper Pin Dust Boot) is the equivalent of the Liebherr OE number. This part directly replaces Liebherr OE number 10326485.Compatible Vehicles
| Brand | Model | Model Type | Engine |
|---|---|---|---|
| DAF | |||
| HENDRICKSON | |||
| LIEBHERR | |||
| SAF | |||
| SCANIA | |||
| SCHMITZ CARGOBULL | |||
| SCHWARZMULLER | |||
| YORK |
Vehicle and Engine Pages
Other OEMs
DAF
- 1505890
HENDRICKSON
- 46780
LIEBHERR
- 10326485
SAF
- 3434382701
- 3434382700
- 3 434 3827 01
- 3 434 3827 00
SCANIA
- 2093080
- 1748132
- 1723418
SCHMITZ CARGOBULL
- 1020777
SCHWARZMULLER
- 46780
WABCO
- 12999738VT
- 12 999 738VT
YORK
- 79787365
FAQ
What is the purpose of a caliper pin dust boot?
The dust boot seals the caliper pin against dirt, water, and road salt, preventing friction and seizing within the braking system.
Does this part fit Liebherr heavy equipment?
Yes, this component is specifically designed to be compatible with Liebherr air disc brake caliper assemblies.
How can I tell if a dust boot needs replacement?
Inspect for visible cracks, hardening of the rubber, or signs of grease leakage, which indicate a failure in the seal.
Can I use different boots on short and long pins?
No, short-stroke guide pins and long-stroke slide pins often require different boot designs to accommodate their specific axial travel.
What are the OE reference numbers of this part?
4051018 directly replaces Liebherr OE number 10326485.